Install app via usb: The device is temporarily res

问题:

When I toggle on the install via USB in developer mode:

• it will pop the toast message said that the device is temporarily restricted
• then toggle off the settings.

Is there any solution for this?
I searched through all the way like turning off MIUI optimization but still does not work. I cannot debug my application by Android Studio in this way......

回答1:

For me on a rooted MIUI v.8.5.1 I just need to:

• turn off wifi
• turn on mobile connection In development options

after doing that both Install via USB and USB debugging started to work.

回答2:

"Install via USB" wont work if your Xiaomi phone is running MIUI 8 or above. Looks like when you try to Enable this option, your phone trys to connect to some chinese server and fails.

I got a work around and it worked for me. Idea is to connect to Chinese-Shanghai server through VPN. Try the following:

1. Install PlexVPN from Playstore and login into it. You will get a 24 hr free VPN service.
2. Select China-Shanghai server and connect.
3. From developer option in your Xiaomi phone, Enable "Install via USB".
4. You can then disconnect the VPN and logout from PlexVPN.

Enjoy!!

回答3:

All you have to do is Turn your Wi-Fi off, turn on mobile data, and then enable the setting for "Install via USB". It'll go through.

Source: http://en.miui.com/thread-544718-1-1.html

回答4:

Turning off Wi-Fi and enabling Mobile Data (thank you Xiaomi for wasting my money to enabling mobile data which the last one I didn't have) on Xiaomi 4A did not work for me. Every time I tried to enable Install App Via USB it displayed me "the device is temporarily restricted". So, I found this solution:

Turn on VPN onto your device with these parameters and try again toggle Install from USB:

• Server Address: China server from https://www.vpngate.net/en/
• IPSec Key: vpn
• Username: vpn
• Password: vpn

回答5:

(1) Turn Off your Wi-Fi
(2) Turn On your Mobile Data
(3) Turn On "Install via USB" from Developer Option of your device.
That's all

回答6:

The Best what I found devices without mobile data in device is to SIGN_OUT from MI_Account in the device and Login Again -> Try to enable USB_Debugging(Security Setting)-> enable INSTALL_VIA_USB

回答7:

Try this

1. Settings -> Additional Settings -> Developer options -> Turn off Miui Optimizations -> Restart
2. Security -> Permissions -> Gear Icon at top right corner -> Turn On "Install via USB"
3. Settings -> Additional Settings -> Developer options -> Turn On/Off "USB Debugging" -> Turn On "Install vis USB"

回答8:

Redmi Note 4 (Nougat 7.0, MIUI 9)

For me, options like Turning WiFi off & on, trying on Data Network, or Turning off MIUI Optimization din't work. Also, the Install via USB never got enabled.

Following steps helped me to install apps via USB

• Additional Settings > Developer Options
• Here, click on USB Debugging (Security Settings). This will take you through some warning screens. Allow (click on Next/Accept) for all. At the end, it will be enabled.
• Now turn on the Install via USB and it gets enabled.
• Try to Run the app by connecting your device. If it still doesn't run (as in my case), find Select USB Configuration and select Charging This worked for me.

回答9:

In MIUI 8.5 it gives the error like you mention while enabling "install via USB", to resolve the error you need to make WIFI off and make mobile data on and then enable the option “Install via USB”. it will work for you.

A detailed blog: http://sforsuresh.in/xiaomi-mi-note-4-install-via-usb-device-temporarily-restricted/

回答10:

These steps worked for me after struggling 1 hour, Not needed to connect to Chinese server.
(1) Turn Off your Wi-Fi
(2) Turn Off your Mobile Data
(3) Turn On "Install via USB" from Developer Option of your device.
4) It will show the Error "No network found"
5) Now Turn On your Mobile Data
6) Again Turn on "Install via USB"
7) it will work, now Happy!

回答11:

Disable WiFi and switch install via USB on while you are connected through data and under your xiaomi account. It works!

回答12:

i had same problem with MI Redmi 4a i solved it by ->

first become a developer by clicking on

setting->About phone->MIUI version (7-8 times)

then, setting->additional setting->developer options->USB debugging

Turn on your usb debugging, then in developer options go for last item name is 'Turn on MIUI optimization', turn off this option it will ask for reboot , then reboot device by clicking Turn off & reboot button

after reboot go to Setting->Permissions click on top right menu button Turn on install via USB option

thats it !

回答13:

Please verify your email and phone number in Mi account first then try this:

1. Settings -> Additional Settings -> Developer options -> Turn off Miui Optimizations -> Restart
2. Security -> Permissions -> Gear Icon at top right corner -> Turn On "Install via USB"
3. Settings -> Additional Settings -> Developer options -> Turn On/Off "USB Debugging" -> Turn On "Install vis USB"

回答14:

In my case,

I turned on Airplane mode and

turn it off then

turn off Wifi and

turn on mobile data.

Now I can turn on install via USB.

May it helps some one like me.

回答15:

I got this problem in my Xiaomi Mi5 from India. All the mentioned solutions didn't work in my case. Then I tried to figure out the Core reason behind it and solve it. In MIUI, in order to change "Install via USB" option, you must be connected to the internet and signed in your Mi account. Due to some reason, requests from out of the China servers are getting rejected, so I connected to one open China VPN and tried again to enable 'Install via USB' and I got success. For detailed solution and VPN details, see this useful Youtube video: https://youtu.be/MeKUJlD-Ke4

回答16:

I will write what worked for me, these other solutions did not work out.

switch "Install via USB" to ON,

When the dialog box "Allowing" appear, quick tap your screen out of the dialog box.

Repeat it until u see that "Install via USB" is ON.

After u see "Install Via USB" is ON, you need to re-checking by pressing back button and go to developer option again.

This worked for me. Thanks.

回答17:

Solution with NO VPNing that worked for me:

1. go to Settings->Accounts->MiAccount->AccountSecurity->Devices
2. I had a Redmi 9 device listed there (I don't own a Redmi device)
3. I removed that Device, so now no devices were listed
4. go back to developer settings, enable install via USB, everything works.

I assume not everyone will have a Redmi device listed there, maybe some will have a different device, maybe some will even have the correct device(this is not something I can test by myself), but it makes sense to me that correcting any wrong devices from that list (or maybe deleting all devices like I did) might fix the problem.

回答18:

For me, on Redmi 3s prime with MIUI 9.2, enabling MIUI optimisation on developer menu worked. It caused phone to restart.

回答19:

Faced same problem with Xiaomi Mi5 MUI9.

Turning on/off connections or MUI optimization did not work for me. What worked is:

Settings -> Additional Settings -> Privacy -> enable Unknown sources

回答20:

In my case when i updated MIUI version to the new available version, resolved the issue. So check if there is any update available for your device, go to

Settings => About phone => System update => here it will shows you the new available MIUI version for your device. So update it then try again.

Note: Turn your Mobile data before enabling install via USB.

回答21:

I had the exact same problem, tried all the suggested workarounds, but none of them worked for me. Strangely enough, what actually has worked for me was turning on MIUI optimization (it was turned off when the problem occurred)! After turning it on, I was able to toggle on install via USB.

回答22:

This worked for me:

Go to settings-> Mi Account->Account security Then verify phone and email, If not added then add and verify that

回答23:

I tried everything to no result, then read somewhere that you should use VPN and connect under China to unlock your phone's bootloader. Applied the same solution here and it worked!

回答24:

If turning your Wi-Fi off is not working for you, then you might have not yet registered your MIUI account as a developer account.

To do so go to MIUI Dev center and register your already created account. After the review process this should not be bugging you anymore.

But remember as other have noted to:

• Turn off Wi-Fi connection
• Turn on mobile connection

回答25:

In my case,I was using my phone that is Redmi 4 and the usb debugging was not working.It was always giving the message "the device is temporarily restricted" .I have tried all this steps but the result was same.Then I found the foolish thing that I have put the device in charging mode only.When I switch to MTP(Transfer files) and then it started working correctly.I know its a foolish thing but it may help to someone.

回答26:

if you have root you can force it with adb shell adb shell su setprop persist.security.adbinput 1

回答27:

Above solutions doesn't work for me. In my case it works by changing Additional settings -> Region to Russia/Some other country.

回答28:

I had this issue on my Redmi Note 4 with MIUI 9. For me the procedure is very simple.

1. Go to Settings -> Permissions -> Gear icon at top right corner.

2. Give the required permission for Install via USB.

3. Goto Developer Options and try using Install via USB. It will work now.

This process is for one time. I hope you have resolved this issue too.

回答29:

turn off Wifi and

turn on mobile data.

Than go to Developer option and turn on install via USB.

回答30:

I'm on MIUI Global 9.6 | Stable [9.6.1.0 (NCFMIFD)].

Problem for me was that wifi was not connected. As mentioned in some answers, apparently device tries to connect to server.

It works for without mobile data.