How do I specify a sudo password for Ansible in non-interactive way?
I'm running Ansible playbook like this:
$ ansible-playbook playbook.yml -i inventory.ini \
--user=username --ask-sudo-pass
But I want to run it like this:
$ ansible-playbook playbook.yml -i inventory.ini \
--user=username` **--sudo-pass=12345**
Is there a way? I want to automate my project deployment as much as possible.
You can pass variable on the command line via --extra-vars "name=value". Sudo password variable is ansible_sudo_pass. So your command would look like:
ansible-playbook playbook.yml -i inventory.ini --user=username \
--extra-vars "ansible_sudo_pass=yourPassword"
Update 2017: Ansible 2.2.1.0 now uses var ansible_become_pass. Either seems to work.
The docs strongly recommend against setting the sudo password in plaintext, and instead using --ask-sudo-pass on the command line when running ansible-playbook
2016 Update:
Ansible 2.0 (not 100% when) marked --ask-sudo-pass as deprecated. The docs now recommend using --ask-become-pass instead, while also swapping out the use of sudo throughout your playbooks with become.
Probably the best way to do this - assuming that you can't use the NOPASSWD solution provided by scottod is to use Mircea Vutcovici's solution in combination with Ansible vault.
For example, you might have a playbook something like this:
- hosts: all
vars_files:
- secret
tasks:
- name: Do something as sudo
service: name=nginx state=restarted
sudo: yes
Here we are including a file called secret which will contain our sudo password.
We will use ansible-vault to create an encrypted version of this file:
ansible-vault create secret
This will ask you for a password, then open your default editor to edit the file. You can put your ansible_sudo_pass in here.
e.g.: secret:
ansible_sudo_pass: mysudopassword
Save and exit, now you have an encrypted secret file which Ansible is able to decrypt when you run your playbook. Note: you can edit the file with ansible-vault edit secret (and enter the password that you used when creating the file)
The final piece of the puzzle is to provide Ansible with a --vault-password-file which it will use to decrypt your secret file.
Create a file called vault.txt and in that put the password that you used when creating your secret file. The password should be a string stored as a single line in the file.
From the Ansible Docs:
.. ensure permissions on the file are such that no one else can access your key and do not add your key to source control
Finally: you can now run your playbook with something like
ansible-playbook playbook.yml -u someuser -i hosts --sudo --vault-password-file=vault.txt
The above is assuming the following directory layout:
.
|_ playbook.yml
|_ secret
|_ hosts
|_ vault.txt
You can read more about Ansible Vault here: https://docs.ansible.com/playbooks_vault.html
Looking at the code (runner/__init__.py), I think you can probably set it in your inventory file :
[whatever]
some-host ansible_sudo_pass='foobar'
There seem to be some provision in ansible.cfg config file too, but not implemented right now (constants.py).
I don't think ansible will let you specify a password in the flags as you wish to do. There may be somewhere in the configs this can be set but this would make using ansible less secure overall and would not be recommended.
One thing you can do is to create a user on the target machine and grant them passwordless sudo privileges to either all commands or a restricted list of commands.
If you run sudo visudo and enter a line like the below, then the user 'privilegedUser' should not have to enter a password when they run something like sudo service xxxx start:
%privilegedUser ALL= NOPASSWD: /usr/bin/service
The sudo password is stored as a variable called ansible_sudo_pass.
You can set this variable in a few ways:
Per host, in your inventory hosts file (inventory/<inventoryname>/hosts)
[server]
10.0.0.0 ansible_sudo_pass=foobar
Per group, in your inventory groups file (inventory/<inventoryname>/groups)
[server:vars]
ansible_sudo_pass=foobar
Per group, in group vars (group_vars/<groupname>/ansible.yml)
ansible_sudo_pass: "foobar"
Per group, encrypted (ansible-vault create group_vars/<groupname>/ansible.yml)
ansible_sudo_pass: "foobar"
You can set the password for a group or for all servers at once:
[all:vars]
ansible_sudo_pass=default_sudo_password_for_all_hosts
[group1:vars]
ansible_sudo_pass=default_sudo_password_for_group1
I was tearing my hair out over this one, now I found a solution which does what i want:
1 encrypted file per host containing the sudo password
/etc/ansible/hosts:
[all:vars]
ansible_ssh_connection=ssh ansible_ssh_user=myuser ansible_ssh_private_key_file=~/.ssh/id_rsa
[some_service_group]
node-0
node-1
then you create for each host an encrypted var-file like so:
ansible-vault create /etc/ansible/host_vars/node-0
with content
ansible_sudo_pass: "my_sudo_pass_for_host_node-0"
how you organize the vault password (enter via --ask-vault-pass) or by cfg is up to you
based on this i suspect you can just encrypt the whole hosts file...
A more savvy way to do this is to store your sudo password in a secure vault such as LastPass or KeePass and then pass it to ansible-playbook using the -e@ but instead of hardcoding the contents in an actual file, you can use the construct -e@<(...) to run a command in a sub-shell, and redirect its output (STDOUT) to a anonymous file descriptor, effectively feeding the password to the -e@<(..).
$ ansible-playbook -i /tmp/hosts pb.yml \
-e@<(echo "ansible_sudo_pass: $(lpass show folder1/item1 --password)")
The above is doing several things, let's break it down.
ansible-playbook -i /tmp/hosts pb.yml - obviously running a playbook via ansible-playbook$(lpass show folder1/item1 --password)" - runs the LastPass CLI lpass and retrieves the password to useecho "ansible_sudo_pass: ...password..." - takes the string 'ansible_sudo_pass: ' and combines it with the password supplied by lpass-e@<(..) - puts the above together, and connects the subshell of <(...) as a file descriptor for ansible-playbook to consume.If you'd rather not type that every time you can simply things like so. First create an alias in your .bashrc like so:
$ cat ~/.bashrc
alias asp='echo "ansible_sudo_pass: $(lpass show folder1/item1 --password)"'
Now you can run your playbook like this:
$ ansible-playbook -i /tmp/hosts pb.yml -e@<(asp)
If you are comfortable with keeping passwords in plain text files, another option is to use a JSON file with the --extra-vars parameter (be sure to exclude the file from source control):
ansible-playbook --extra-vars "@private_vars.json" playbook.yml
Ansible has supported this option since 1.3.
you can write sudo password for your playbook in the hosts file like this:
[host-group-name]
host-name:port ansible_sudo_pass='*your-sudo-password*'
Ansible vault has been suggested a couple of times here, but I prefer git-crypt for encrypting sensitive files in my playbooks. If you're using git to keep your ansible playbooks, it's a snap. The problem I've found with ansible vault is that I inevitably end up coming across encrypted copies of the file that I want to work with and have to go decrypt it before I can work. git-crypt offers a nicer workflow IMO.
Using this, you can put your passwords in a var in your playbook, and mark your playbook as an encrypted file in .gitattributes like this:
my_playbook.yml filter=git-crypt diff=git-crypt
Your playbook will be transparently encrypted on Github. Then you just need to either install your encryption key on the host you use to run ansible, or follow the instruction on the documentation to set it up with gpg.
There's a good Q&A on forwarding gpg keys like your ssh-agent forwards SSH keys here: https://superuser.com/questions/161973/how-can-i-forward-a-gpg-key-via-ssh-agent.
You can use sshpass utility as below,
$ sshpass -p "your pass" ansible pattern -m module -a args \
-i inventory --ask-sudo-pass
You can use ansible vault which will code your password into encrypted vault. After that you can use variable from vault in playbooks.
Some documentation on ansible vault:
http://docs.ansible.com/playbooks_vault.html
We are using it as vault per environment. To edit vault we have command as:
ansible-vault edit inventories/production/group_vars/all/vault
If you want to call vault variable you have to use ansible-playbook with parameters like:
ansible-playbook -s --vault-password-file=~/.ansible_vault.password
Yes we are storing vault password in local directory in plain text but it's not more dangerous like store root password for every system. Root password is inside vault file or you can have it like sudoers file for your user/group.
I'm recommending to use sudoers file on the server. Here is example for group admin:
%admin ALL=(ALL) NOPASSWD:ALL
Just call your playbook with --extra-vars "become_pass=Password"
become_pass=('ansible_become_password', 'ansible_become_pass')
Using ansible 2.4.1.0 and the following shall work:
[all]
17.26.131.10
17.26.131.11
17.26.131.12
17.26.131.13
17.26.131.14
[all:vars]
ansible_connection=ssh
ansible_user=per
ansible_ssh_pass=per
ansible_sudo_pass=per
And just run the playbook with this inventory as:
ansible-playbook -i inventory copyTest.yml
After five years, I can see this is still a very relevant subject. Somewhat mirroring leucos's answer which I find the best in my case, using ansible tools only (without any centralised authentication, tokens or whatever). This assumes you have the same username and the same public key on all servers. If you don't, of course you'd need to be more specific and add the corresponding variables next to the hosts:
[all:vars]
ansible_ssh_user=ansible
ansible_ssh_private_key_file=home/user/.ssh/mykey
[group]
192.168.0.50 ansible_sudo_pass='{{ myserver_sudo }}'
ansible-vault create mypasswd.yml
ansible-vault edit mypasswd.yml
Add:
myserver_sudo: mysecretpassword
Then:
ansible-playbook -i inv.ini my_role.yml --ask-vault --extra-vars '@passwd.yml'
At least this way you don't have to write more the variables which point to the passwords.
My hack to automate this was to use an environment variable and access it via --extra-vars="ansible_become_pass='{{ lookup('env', 'ANSIBLE_BECOME_PASS') }}'".
Export an env var, but avoid bash/shell history (prepend with a space, or other methods). E.g.:
export ANSIBLE_BECOME_PASS='<your password>'
Lookup the env var while passing the extra ansible_become_pass variable into the ansible-playbook, E.g.:
ansible-playbook playbook.yml -i inventories/dev/hosts.yml -u user --extra-vars="ansible_become_pass='{{ lookup('env', 'ANSIBLE_BECOME_PASS') }}'"
Good alternate answers:
ansible_become_pass. This is decent. However, for the paranoid teams that need to share ansible vault passwords, and execute ansible plays with induvidual accounts, they coudld use the shared vault password to reverse each others operating system password (identiy theft). Arguably, you need to trust your own team?@ prefix to read the ansible variable from the file desriptor. Avoids bash history at least. Not sure, but hopefully subshell echo doesn't get caught and exposed in audit logging (e.g. auditd).we Can also Use EXPECT BLOCK in ansible to spawn bash and customize it as per your needs
- name: Run expect to INSTALL TA
shell: |
set timeout 100
spawn /bin/sh -i
expect -re "$ "
send "sudo yum remove -y xyz\n"
expect "$ "
send "sudo yum localinstall -y {{ rpm_remotehost_path_for_xyz }}\n"
expect "~]$ "
send "\n"
exit 0
args:
executable: /usr/bin/expect
Very simple, and only add in the variable file:
Example:
$ vim group_vars/all
And add these:
Ansible_connection: ssh
Ansible_ssh_user: rafael
Ansible_ssh_pass: password123
Ansible_become_pass: password123
Just an addendum, so nobody else goes through the annoyance I recently did:
AFAIK, the best solution is one along the general lines of toast38coza's above. If it makes sense to tie your password files and your playbook together statically, then follow his template with vars_files (or include_vars). If you want to keep them separate, you can supply the vault contents on the command line like so:
ansible-playbook --ask-vault-pass -e@<PATH_TO_VAULT_FILE> <PLAYBOOK_FILE>
That's obvious in retrospect, but here are the gotchas:
That bloody @ sign. If you leave it out, parsing will fail silently, and ansible-playbook will proceed as though you'd never specified the file in the first place.
You must explicitly import the contents of the vault, either with a command-line --extra-vars/-e or within your YAML code. The --ask-vault-pass flag doesn't do anything by itself (besides prompt you for a value which may or may not be used later).
May you include your "@"s and save an hour.
Above solution by @toast38coza worked for me; just that sudo: yes is deprecated in Ansible now. Use become and become_user instead.
tasks:
- name: Restart apache service
service: name=apache2 state=restarted
become: yes
become_user: root
This worked for me... Created file /etc/sudoers.d/90-init-users file with NOPASSWD
echo "user ALL=(ALL) NOPASSWD:ALL" > 90-init-users
where "user" is your userid.
