Is there any way to get both headers and body for a cURL request using PHP? I found that this option:
curl_setopt($ch, CURLOPT_HEADER, true);
is going to return the body plus headers, but then I need to parse it to get the body. Is there any way to get both in a more usable (and secure) way?
Note that for "single request" I mean avoiding issuing a HEAD request prior of GET/POST.
One solution to this was posted in the PHP documentation comments: http://www.php.net/manual/en/function.curl-exec.php#80442
Code example:
$ch = curl_init();
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_VERBOSE, 1);
curl_setopt($ch, CURLOPT_HEADER, 1);
// ...
$response = curl_exec($ch);
// Then, after your curl_exec call:
$header_size = curl_getinfo($ch, CURLINFO_HEADER_SIZE);
$header = substr($response, 0, $header_size);
$body = substr($response, $header_size);
Warning: As noted in the comments below, this may not be reliable when used with proxy servers or when handling certain types of redirects. @Geoffrey's answer may handle these more reliably.
Many of the other solutions offered this thread are not doing this correctly.
\r\n\r\n is not reliable when CURLOPT_FOLLOWLOCATION is on or when the server responds with a 100 code.\n for new lines.CURLINFO_HEADER_SIZE is also not always reliable, especially when proxies are used or in some of the same redirection scenarios.The most correct method is using CURLOPT_HEADERFUNCTION.
Here is a very clean method of performing this using PHP closures. It also converts all headers to lowercase for consistent handling across servers and HTTP versions.
This version will retain duplicated headers
This complies with RFC822 and RFC2616, please do not suggest edits to make use of the mb_ string functions, it is incorrect!
$ch = curl_init();
$headers = [];
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
// this function is called by curl for each header received
curl_setopt($ch, CURLOPT_HEADERFUNCTION,
function($curl, $header) use (&$headers)
{
$len = strlen($header);
$header = explode(':', $header, 2);
if (count($header) < 2) // ignore invalid headers
return $len;
$headers[strtolower(trim($header[0]))][] = trim($header[1]);
return $len;
}
);
$data = curl_exec($ch);
print_r($headers);
Curl has a built in option for this, called CURLOPT_HEADERFUNCTION. The value of this option must be the name of a callback function. Curl will pass the header (and the header only!) to this callback function, line-by-line (so the function will be called for each header line, starting from the top of the header section). Your callback function then can do anything with it (and must return the number of bytes of the given line). Here is a tested working code:
function HandleHeaderLine( $curl, $header_line ) {
echo "<br>YEAH: ".$header_line; // or do whatever
return strlen($header_line);
}
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, "http://www.google.com");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_HEADERFUNCTION, "HandleHeaderLine");
$body = curl_exec($ch);
The above works with everything, different protocols and proxies too, and you dont need to worry about the header size, or set lots of different curl options.
P.S.: To handle the header lines with an object method, do this:
curl_setopt($ch, CURLOPT_HEADERFUNCTION, array(&$object, 'methodName'))
is this what are you looking to?
curl_setopt($ch, CURLOPT_HTTPHEADER, array('Expect:'));
$response = curl_exec($ch);
list($header, $body) = explode("\r\n\r\n", $response, 2);
Just set options :
CURLOPT_HEADER, 0
CURLOPT_RETURNTRANSFER, 1
and use curl_getinfo with CURLINFO_HTTP_CODE (or no opt param and you will have an associative array with all the informations you want)
More at : http://php.net/manual/fr/function.curl-getinfo.php
If you specifically want the Content-Type, there's a special cURL option to retrieve it:
$ch = curl_init($url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
$response = curl_exec($ch);
$content_type = curl_getinfo($ch, CURLINFO_CONTENT_TYPE);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_VERBOSE, 1);
curl_setopt($ch, CURLOPT_HEADER, 1);
$parts = explode("\r\n\r\nHTTP/", $response);
$parts = (count($parts) > 1 ? 'HTTP/' : '').array_pop($parts);
list($headers, $body) = explode("\r\n\r\n", $parts, 2);
Works with HTTP/1.1 100 Continue before other headers.
If you need work with buggy servers which sends only LF instead of CRLF as line breaks you can use preg_split as follows:
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_VERBOSE, 1);
curl_setopt($ch, CURLOPT_HEADER, 1);
$parts = preg_split("@\r?\n\r?\nHTTP/@u", $response);
$parts = (count($parts) > 1 ? 'HTTP/' : '').array_pop($parts);
list($headers, $body) = preg_split("@\r?\n\r?\n@u", $parts, 2);
My way is
$response = curl_exec($ch);
$x = explode("\r\n\r\n", $v, 3);
$header=http_parse_headers($x[0]);
if ($header=['Response Code']==100){ //use the other "header"
$header=http_parse_headers($x[1]);
$body=$x[2];
}else{
$body=$x[1];
}
If needed apply a for loop and remove the explode limit.
The problem with many answers here is that "\r\n\r\n" can legitimately appear in the body of the html, so you can't be sure that you're splitting headers correctly.
It seems that the only way to store headers separately with one call to curl_exec is to use a callback as is suggested above in https://stackoverflow.com/a/25118032/3326494
And then to (reliably) get just the body of the request, you would need to pass the value of the Content-Length header to substr() as a negative start value.
Here is my contribution to the debate ... This returns a single array with the data separated and the headers listed. This works on the basis that CURL will return a headers chunk [ blank line ] data
curl_setopt($ch, CURLOPT_HEADER, 1); // we need this to get headers back
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_VERBOSE, true);
// $output contains the output string
$output = curl_exec($ch);
$lines = explode("\n",$output);
$out = array();
$headers = true;
foreach ($lines as $l){
$l = trim($l);
if ($headers && !empty($l)){
if (strpos($l,'HTTP') !== false){
$p = explode(' ',$l);
$out['Headers']['Status'] = trim($p[1]);
} else {
$p = explode(':',$l);
$out['Headers'][$p[0]] = trim($p[1]);
}
} elseif (!empty($l)) {
$out['Data'] = $l;
}
if (empty($l)){
$headers = false;
}
}
Just in case you can't / don't use CURLOPT_HEADERFUNCTION or other solutions;
$nextCheck = function($body) {
return ($body && strpos($body, 'HTTP/') === 0);
};
[$headers, $body] = explode("\r\n\r\n", $result, 2);
if ($nextCheck($body)) {
do {
[$headers, $body] = explode("\r\n\r\n", $body, 2);
} while ($nextCheck($body));
}
Return response headers with a reference parameter:
<?php
$data=array('device_token'=>'5641c5b10751c49c07ceb4',
'content'=>'测试测试test'
);
$rtn=curl_to_host('POST', 'http://test.com/send_by_device_token', array(), $data, $resp_headers);
echo $rtn;
var_export($resp_headers);
function curl_to_host($method, $url, $headers, $data, &$resp_headers)
{$ch=curl_init($url);
curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, $GLOBALS['POST_TO_HOST.LINE_TIMEOUT']?$GLOBALS['POST_TO_HOST.LINE_TIMEOUT']:5);
curl_setopt($ch, CURLOPT_TIMEOUT, $GLOBALS['POST_TO_HOST.TOTAL_TIMEOUT']?$GLOBALS['POST_TO_HOST.TOTAL_TIMEOUT']:20);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, false);
curl_setopt($ch, CURLOPT_HEADER, 1);
if ($method=='POST')
{curl_setopt($ch, CURLOPT_POST, true);
curl_setopt($ch, CURLOPT_POSTFIELDS, http_build_query($data));
}
foreach ($headers as $k=>$v)
{$headers[$k]=str_replace(' ', '-', ucwords(strtolower(str_replace('_', ' ', $k)))).': '.$v;
}
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
$rtn=curl_exec($ch);
curl_close($ch);
$rtn=explode("\r\n\r\nHTTP/", $rtn, 2); //to deal with "HTTP/1.1 100 Continue\r\n\r\nHTTP/1.1 200 OK...\r\n\r\n..." header
$rtn=(count($rtn)>1 ? 'HTTP/' : '').array_pop($rtn);
list($str_resp_headers, $rtn)=explode("\r\n\r\n", $rtn, 2);
$str_resp_headers=explode("\r\n", $str_resp_headers);
array_shift($str_resp_headers); //get rid of "HTTP/1.1 200 OK"
$resp_headers=array();
foreach ($str_resp_headers as $k=>$v)
{$v=explode(': ', $v, 2);
$resp_headers[$v[0]]=$v[1];
}
return $rtn;
}
?>
If you don't really need to use curl;
$body = file_get_contents('http://example.com');
var_export($http_response_header);
var_export($body);
Which outputs
array (
0 => 'HTTP/1.0 200 OK',
1 => 'Accept-Ranges: bytes',
2 => 'Cache-Control: max-age=604800',
3 => 'Content-Type: text/html',
4 => 'Date: Tue, 24 Feb 2015 20:37:13 GMT',
5 => 'Etag: "359670651"',
6 => 'Expires: Tue, 03 Mar 2015 20:37:13 GMT',
7 => 'Last-Modified: Fri, 09 Aug 2013 23:54:35 GMT',
8 => 'Server: ECS (cpm/F9D5)',
9 => 'X-Cache: HIT',
10 => 'x-ec-custom-error: 1',
11 => 'Content-Length: 1270',
12 => 'Connection: close',
)'<!doctype html>
<html>
<head>
<title>Example Domain</title>...
See http://php.net/manual/en/reserved.variables.httpresponseheader.php
