Regex to validate password strength

问题:

My password strength criteria is as below :

• 8 characters length
• 2 letters in Upper Case
• 1 Special Character (!@#$&*)
• 2 numerals (0-9)
• 3 letters in Lower Case

Can somebody please give me regex for same. All conditions must be met by password .

回答1:

You can do these checks using positive look ahead assertions:

^(?=.*[A-Z].*[A-Z])(?=.*[!@#$&*])(?=.*[0-9].*[0-9])(?=.*[a-z].*[a-z].*[a-z]).{8}$

Rubular link

Explanation:

^                         Start anchor
(?=.*[A-Z].*[A-Z])        Ensure string has two uppercase letters.
(?=.*[!@#$&*])            Ensure string has one special case letter.
(?=.*[0-9].*[0-9])        Ensure string has two digits.
(?=.*[a-z].*[a-z].*[a-z]) Ensure string has three lowercase letters.
.{8}                      Ensure string is of length 8.
$                         End anchor.

回答2:

You can use zero-length positive look-aheads to specify each of your constraints separately:

(?=.{8,})(?=.*\p{Lu}.*\p{Lu})(?=.*[!@#$&*])(?=.*[0-9])(?=.*\p{Ll}.*\p{Ll})

If your regex engine doesn't support the \p notation and pure ASCII is enough, then you can replace \p{Lu} with [A-Z] and \p{Ll} with [a-z].

回答3:

Answers given above are perfect but I suggest to use multiple smaller regex rather than a big one.
Splitting the long regex have some advantages:

• easiness to write and read
• easiness to debug
• easiness to add/remove part of regex

Generally this approach keep code easily maintainable.

Having said that, I share a piece of code that I write in Swift as example:

struct RegExp {

    /**
     Check password complexity

     - parameter password:         password to test
     - parameter length:           password min length
     - parameter patternsToEscape: patterns that password must not contains
     - parameter caseSensitivty:   specify if password must conforms case sensitivity or not
     - parameter numericDigits:    specify if password must conforms contains numeric digits or not

     - returns: boolean that describes if password is valid or not
     */
    static func checkPasswordComplexity(password password: String, length: Int, patternsToEscape: [String], caseSensitivty: Bool, numericDigits: Bool) -> Bool {
        if (password.length < length) {
            return false
        }
        if caseSensitivty {
            let hasUpperCase = RegExp.matchesForRegexInText("[A-Z]", text: password).count > 0
            if !hasUpperCase {
                return false
            }
            let hasLowerCase = RegExp.matchesForRegexInText("[a-z]", text: password).count > 0
            if !hasLowerCase {
                return false
            }
        }
        if numericDigits {
            let hasNumbers = RegExp.matchesForRegexInText("\\d", text: password).count > 0
            if !hasNumbers {
                return false
            }
        }
        if patternsToEscape.count > 0 {
            let passwordLowerCase = password.lowercaseString
            for pattern in patternsToEscape {
                let hasMatchesWithPattern = RegExp.matchesForRegexInText(pattern, text: passwordLowerCase).count > 0
                if hasMatchesWithPattern {
                    return false
                }
            }
        }
        return true
    }

    static func matchesForRegexInText(regex: String, text: String) -> [String] {
        do {
            let regex = try NSRegularExpression(pattern: regex, options: [])
            let nsString = text as NSString
            let results = regex.matchesInString(text,
                options: [], range: NSMakeRange(0, nsString.length))
            return results.map { nsString.substringWithRange($0.range)}
        } catch let error as NSError {
            print("invalid regex: \(error.localizedDescription)")
            return []
        }
    }
}

回答4:

I would suggest adding

(?!.*pass|.*word|.*1234|.*qwer|.*asdf) exclude common passwords

回答5:

codaddict's solution works fine, but this one is a bit more efficient: (Python syntax)

password = re.compile(r"""(?#!py password Rev:20160831_2100)
    # Validate password: 2 upper, 1 special, 2 digit, 1 lower, 8 chars.
    ^                        # Anchor to start of string.
    (?=(?:[^A-Z]*[A-Z]){2})  # At least two uppercase.
    (?=[^!@#$&*]*[!@#$&*])   # At least one "special".
    (?=(?:[^0-9]*[0-9]){2})  # At least two digit.
    .{8,}                    # Password length is 8 or more.
    $                        # Anchor to end of string.
    """, re.VERBOSE)

The negated character classes consume everything up to the desired character in a single step, requiring zero backtracking. (The dot star solution works just fine, but does require some backtracking.) Of course with short target strings such as passwords, this efficiency improvement will be negligible.

回答6:

import re

RegexLength=re.compile(r'^\S{8,}$')
RegexDigit=re.compile(r'\d')
RegexLower=re.compile(r'[a-z]')
RegexUpper=re.compile(r'[A-Z]')


def IsStrongPW(password):
    if RegexLength.search(password) == None or RegexDigit.search(password) == None or RegexUpper.search(password) == None or RegexLower.search(password) == None:
        return False
    else:
        return True

while True:
    userpw=input("please input your passord to check: \n")
    if userpw == "exit":
        break
    else:
        print(IsStrongPW(userpw))

回答7:

For PHP, this works fine!

 if(preg_match("/^(?=(?:[^A-Z]*[A-Z]){2})(?=(?:[^0-9]*[0-9]){2}).{8,}$/", 
 'CaSu4Li8')){
    return true;
 }else{
    return fasle;
 }

in this case the result is true

Thsks for @ridgerunner

回答8:

Another solution:

import re

passwordRegex = re.compile(r'''(
    ^(?=.*[A-Z].*[A-Z])                # at least two capital letters
    (?=.*[!@#$&*])                     # at least one of these special c-er
    (?=.*[0-9].*[0-9])                 # at least two numeric digits
    (?=.*[a-z].*[a-z].*[a-z])          # at least three lower case letters
    .{8,}                              # at least 8 total digits
    $
    )''', re.VERBOSE)

def userInputPasswordCheck():
    print('Enter a potential password:')
    while True:
        m = input()
        mo = passwordRegex.search(m) 
        if (not mo):
           print('''
Your password should have at least one special charachter,
two digits, two uppercase and three lowercase charachter. Length: 8+ ch-ers.

Enter another password:''')          
        else:
           print('Password is strong')
           return
userInputPasswordCheck()

回答9:

Password must meet at least 3 out of the following 4 complexity rules,

[at least 1 uppercase character (A-Z) at least 1 lowercase character (a-z) at least 1 digit (0-9) at least 1 special character — do not forget to treat space as special characters too]

at least 10 characters

at most 128 characters

not more than 2 identical characters in a row (e.g., 111 not allowed)

'^(?!.(.)\1{2}) ((?=.[a-z])(?=.[A-Z])(?=.[0-9])|(?=.[a-z])(?=.[A-Z])(?=.[^a-zA-Z0-9])|(?=.[A-Z])(?=.[0-9])(?=.[^a-zA-Z0-9])|(?=.[a-z])(?=.[0-9])(?=.*[^a-zA-Z0-9])).{10,127}$'

(?!.*(.)\1{2})

(?=.[a-z])(?=.[A-Z])(?=.*[0-9])

(?=.[a-z])(?=.[A-Z])(?=.*[^a-zA-Z0-9])

(?=.[A-Z])(?=.[0-9])(?=.*[^a-zA-Z0-9])

(?=.[a-z])(?=.[0-9])(?=.*[^a-zA-Z0-9])

.{10.127}