I'm using Genymotion v13.0 on Windows 8 Pro to create Virtual Device successfully, but when I try to run it I get this error: Unable to start Genymotion Virtual Device.
Screenshot:
Trying to run it via Virtualbox, I got this error message:
Virtualbox Host Only Ethernet Adapter Failed to start
Screenshot:
Virtual Device previously could run well until I got this issue.
Can someone please tell me how to Fix it?
This worked for me using GenyMotion 2.0.3 and VirtualBox 4.3.6. My problem was I have an existing host-only adaptor that is used by Vagrant. I can't simply delete it, it will trash my Vagrant VM.
Create a new host-only adaptor in the Virtual Box global settings.
Give it a separate address space from any existing host-only adaptors. For example, I set mine up as follows, where I also have a vboxnet0 (used by Vagrant) that uses 192.168.56.x
name: vboxnet1
IPV4 address: 192.168.57.1
mask: 255.255.255.0
DHCP:
address 192.168.57.100
mask: 255.255.255.0
low bounds: 192.168.57.101
high bound: 192.168.57.254
Then, edit your existing GenyMotion VM to use this host-only adaptor, and restart it from GenyMotion.
Good luck!
I have a same problem and I solve it with this :
VirtualBox Host only adapter that created"VirtualBox NDIS6 Bridged Networking driver"
I had the same issue and this fixed it:
Go to Network and Sharing Center > Change adapter settings and enable these:
I think that enabling the second will do the job, but I did the first anyways.
Hope it helps.
It may be because of you assigned more than 50 % RAM memory to your emulator.
Open Oracle VM --> Settings --> General And then Decrease memory assigned to the device.
And in Newer Versions,
Open Oracle VM --> Settings --> System --> MotherBoard Tab And then Decrease memory assigned to the device
In Win10 it might be helpful to download VirtualBox latest version.
It was the only thing that solved it for me. Hope it will save someone some time and trouble.
Select yourVM -> Settings -> Network -> Disable the Network Adapter (It will be re-configured by Genymotion)
Start the Android Image again in Genymotion UI (not in Virtualbox), It should work now!
this way resolve my problem.
1.go to Control Panel-> Network and Internet -> change adapter settings
right click on VirtualBox Host-Only Network and select properties
this programs must have tick
if see another program select and uninstall it
2.in virtulbox go to file -> preferences -> network
double click on VirtualBox Host-Only ethernet adapter
edit like this:
IPV4 address: 192.168.56.1 mask: 255.255.255.0
DHCP: address 192.168.56.100 mask: 255.255.255.0 low bounds:192.168.56.101 high bound: 192.168.56.254
restart or log off your windows and start genymotion
if dont solved your problem in virtulbox go to file -> preferences -> network and delete Host-Only ethernet adapter.
I had the same problem in Mac OS, it was a bug in VirtualBox V5.0.2 and fixed in V5.0.3, I installed V5.0.3 and no more problem
It seems your VirtualBox installation doesn't work correctly. You should try to reinstall/upgrade VirtualBox so that during the installation process it fixes this "Interface not found" issue.
I had the same issue and figured it out today. I had to release the existing virtual drives before Genymotion would allow me to create a NEW virtual drive. Once you click create new drive, it prompts you to login to your Genymotion cloud account. Now I am actually able to run it. Hope this helps.
Edit* Also tried reinstalling AND repairing Virtualbox multiple times and still got same error. Only until I released the existing virtual drives did it start working.
As it mentioned above assigning more than 50 % RAM memory to your emmulator.
For me fixed this way too.
My machine have 8GB and I assigned 4GB for per device. Resetting it solve my problem.
In Mac, Open Oracle Virtual Box and Goto VirtualBox -> Preferences -> Network. Select the tab'Host Only Networks' & delete vboxnet0. It will be recreated next time you launch genymotion emulator.
I did the following to resolve mine:
In Adapter 1 tab, It should be attached to Host-Only Adapter. Check what is the name of the used adapter Name then close it.
Open File|Preferences in Virtualbox, then go to Network section/tab
Under Host-only Networks tab, find the same name you have already gotten in step 3.
Double click on that name and apple the following configuration
IPv4 Adapter: 192.168.65.1IPV4 Network Mask: 255.255.255.0
DHCP Server:
192.168.65.100255.255.255.0192.168.65.101192.168.65.255I recently had this problem, and setting up the virtual network configurations did not work. I found this then: https://forums.virtualbox.org/viewtopic.php?f=6&t=70199
Virtualbox seems to vhave a bug in recent releases.
Reinstall it using cmd prompt, and use this as arguments for the executable : -msiparams NETWORKTYPE=NDIS5
This did the trick to me. I'm on windows 10, using the VirtualBox-5.0.10-104061-Win version.
Note that, this seems not to be a problem with genymotion only.
Hope I spare you some time. I sure spent more than I thought it would take me.
You can check the version of your genymotion and virtualbox. The genymotion 2.5.3 would work better with virtualbox 4.3.30.
1.Run VirtualBox as administrator
2.Go to File -> Preferences -> Network -> Host Only Networks
3.Add a new one or just edit and delete all existed
Adapter Tab:
IPv4 Address: 192.168.0.201
IPv4 Network Mask: 255.255.255.0
DHCP Server Tab:
Server Address: 192.168.0.100
Server Mask: 255.255.255.0
Lower Address Bound: 192.168.0.101
Upper Address Bound: 192.168.0.199
At fast open VirtualBox and then open Genymotion. It then not work just change the Address and try again and restart your PC.
There is a known issue with the new NDIS6 driver, you can install it to use the old NDIS5 driver
Steps I followed:
1.Uninstall Virtualbox and try reinstalling it using command prompt.
2. Run command Prompt in administrative mode;
3.Check your Network Drivers if you are using NDIS6 or 6.+ ;
Write >VirtualBox-5.0.11-104101-Win.exe -msiparams NETWORKTYPE=NDIS5;
4.Now Follow the install steps and finish installation steps.
5. Now try starting device with VirtualBox.
This worked for me.
Just download and install the latest version of Virtual box, run it then run the emulator and viola, it will be up and running. This one worked for me.
Just download latest Virtualbox version. Is works for me.
Try this one. it works for me. :)
I also disabled Hyper-V to makes mine work.
Genymotion FAQ
To date, VirtualBox is not yet fully compatible with Windows 10. As Genymotion relies on the use of VirtualBox in the background, some problems may arise. If you have any troubles running Genymotion on Windows 10, we first recommend that you put VirtualBox in a clean state. To do so:
If Genymotion still doesn’t run, you can manually configure a host-only network:
in my case there was 2 reasons (checked) that my genymotion device couldn't run on windows 10/64bit
run virtual box > choose your device in the list > Settings > System (left list) > set your base memory on 1024
{var%20f='http://v.t.sina.com.cn/share/share.php?appkey=1515056452',u=z||d.location,p=['&url=',e(u),'&title=',e(t||d.title),'&source=',e(r),'&sourceUrl=',e(l),'&content=',c||'gb2312','&pic=',e(p||'')].join('');function%20a(){if(!window.open([f,p].join(''),'mb',['toolbar=0,status=0,resizable=1,width=440,height=430,left=',(s.width-440)/2,',top=',(s.height-430)/2].join('')))u.href=[f,p].join('');};if(/Firefox/.test(navigator.userAgent))setTimeout(a,0);else%20a();})(screen,document,encodeURIComponent,'','','https://i.stack.imgur.com/elVpv.jpg', '推荐 闹够了就滚 的文章《Unable to start Genymotion Virtual Device - Virtua》','https://www.manongdao.com/article-144724.html','页面编码gb2312|utf-8默认gb2312'));){kind=link}