I have a USB device which I'm tring to talk to using pyusb 1.0.2 on linux (Linux tpad 4.15.0-38-generic #41~16.04.1-Ubuntu SMP Wed Oct 10 20:16:04 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux). Running python 3.5 I get the following error (full trace at bottom of this post):
usb.core.USBError: [Errno 13] Access denied (insufficient permissions)
Mounting the usb and using lsusb and then inspecting it:
udevadm info -a -p $(udevadm info -q path -n /dev/bus/usb/006/011)
shows
looking at device '/devices/pci0000:00/0000:00:10.0/usb6/6-1': KERNEL=="6-1" SUBSYSTEM=="usb" DRIVER=="usb" ATTR{authorized}=="1" ATTR{avoid_reset_quirk}=="0" ATTR{bConfigurationValue}=="1" ATTR{bDeviceClass}=="00" ATTR{bDeviceProtocol}=="00" ATTR{bDeviceSubClass}=="00" ATTR{bMaxPacketSize0}=="8" ATTR{bMaxPower}=="98mA" ATTR{bNumConfigurations}=="1" ATTR{bNumInterfaces}==" 1" ATTR{bcdDevice}=="0111" ATTR{bmAttributes}=="80" ATTR{busnum}=="6" ATTR{configuration}=="" ATTR{devnum}=="11" ATTR{devpath}=="1" ATTR{idProduct}=="0001" ATTR{idVendor}=="17a4" ATTR{ltm_capable}=="no" ATTR{manufacturer}=="Concept2" ATTR{maxchild}=="0" ATTR{product}=="Concept2 Performance Monitor 3 (PM3)" ATTR{quirks}=="0x0" ATTR{removable}=="unknown" ATTR{serial}=="300118412" ATTR{speed}=="12" ATTR{urbnum}=="12" ATTR{version}==" 1.10"
So I wrote a rule in /etc/udev/rules.d/10-local.rules like this (FYI -- I've also tried "user1" which is the user python shows it is running under and I've tried both ":=" and "="):
SUBSYSTEMS=="usb", ATTRS{idVendor}=="17a4", ATTRS{idProduct}=="0001", GROUP:="users", MODE="0777"
Then I ran udevadm test /devices/pci0000:00/0000:00:10.0/usb6/6-1
which shows:
calling: test
version 229
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.
=== trie on-disk ===
tool version: 229
file size: 7049340 bytes
header size 80 bytes
strings 1759644 bytes
nodes 5289616 bytes
Load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/lib/systemd/network' changed
Parsed configuration file /lib/systemd/network/99-default.link
Created link configuration context.
timestamp of '/etc/udev/rules.d' changed
Reading rules file: /etc/udev/rules.d/10-local.rules
Reading rules file: /lib/udev/rules.d/40-crda.rules
[removed long list of rule files...]
Skipping empty file: /etc/udev/rules.d/99-usbftdi.rules
rules contain 393216 bytes tokens (32768 * 12 bytes), 33403 bytes strings
25688 strings (211409 bytes), 22263 de-duplicated (181432 bytes), 3426 trie nodes used
GROUP 100 /etc/udev/rules.d/10-local.rules:1
MODE 0777 /etc/udev/rules.d/10-local.rules:1
value '[dmi/id]sys_vendor' is 'LENOVO'
value '[dmi/id]sys_vendor' is 'LENOVO'
IMPORT builtin 'usb_id' /lib/udev/rules.d/50-udev-default.rules:13
IMPORT builtin 'hwdb' /lib/udev/rules.d/50-udev-default.rules:13
MODE 0664 /lib/udev/rules.d/50-udev-default.rules:41
PROGRAM 'mtp-probe /sys/devices/pci0000:00/0000:00:10.0/usb6/6-1 6 11' /lib/udev/rules.d/69-libmtp.rules:1923
starting 'mtp-probe /sys/devices/pci0000:00/0000:00:10.0/usb6/6-1 6 11'
'mtp-probe /sys/devices/pci0000:00/0000:00:10.0/usb6/6-1 6 11'(out) '0'
Process 'mtp-probe /sys/devices/pci0000:00/0000:00:10.0/usb6/6-1 6 11' succeeded.
handling device node '/dev/bus/usb/006/011', devnum=c189:650, mode=0664, uid=0, gid=100
set permissions /dev/bus/usb/006/011, 020664, uid=0, gid=100
setting mode of /dev/bus/usb/006/011 to 020664 failed: Operation not permitted
setting owner of /dev/bus/usb/006/011 to uid=0, gid=100 failed: Operation not permitted
ACTION=add
BUSNUM=006
DEVNAME=/dev/bus/usb/006/011
DEVNUM=011
DEVPATH=/devices/pci0000:00/0000:00:10.0/usb6/6-1
DEVTYPE=usb_device
DRIVER=usb
ID_BUS=usb
ID_MODEL=Concept2_Performance_Monitor_3__PM3_
ID_MODEL_ENC=Concept2\x20Performance\x20Monitor\x203\x20\x28PM3\x29
ID_MODEL_FROM_DATABASE=Performance Monitor 3
ID_MODEL_ID=0001
ID_REVISION=0111
ID_SERIAL=Concept2_Concept2_Performance_Monitor_3__PM3__300118412
ID_SERIAL_SHORT=300118412
ID_USB_INTERFACES=:030000:
ID_VENDOR=Concept2
ID_VENDOR_ENC=Concept2
ID_VENDOR_FROM_DATABASE=Concept2
ID_VENDOR_ID=17a4
MAJOR=189
MINOR=650
PRODUCT=17a4/1/111
SUBSYSTEM=usb
TYPE=0/0/0
USEC_INITIALIZED=3850171749
Unload module index
Unloaded link configuration context.
However after doing this python still reports access errors to the USB device.
Traceback (most recent call last):
File "/home/user1/PycharmProjects/PyRow/statshow.py", line 22, in <module>
erg = pyrow.pyrow(ergs[0])
File "/home/user1/PycharmProjects/PyRow/pyrow.py", line 61, in __init__
usb.util.claim_interface(erg, INTERFACE)
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/util.py", line 205, in claim_interface
device._ctx.managed_claim_interface(device, interface)
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/core.py", line 102, in wrapper
return f(self, *args, **kwargs)
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/core.py", line 159, in managed_claim_interface
self.managed_open()
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/core.py", line 102, in wrapper
return f(self, *args, **kwargs)
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/core.py", line 120, in managed_open
self.handle = self.backend.open_device(self.dev)
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/backend/libusb1.py", line 786, in open_device
return _DeviceHandle(dev)
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/backend/libusb1.py", line 643, in __init__
_check(_lib.libusb_open(self.devid, byref(self.handle)))
File "/home/user1/PycharmProjects/camera/venv/lib/python3.5/site-packages/usb/backend/libusb1.py", line 595, in _check
raise USBError(_strerror(ret), ret, _libusb_errno[ret])
usb.core.USBError: [Errno 13] Access denied (insufficient permissions)
I'm out of ideas on how to fix this. Are there any suggestions?
