What's the difference between a single precisi

问题:

What is the difference between a single precision floating point operation and double precision floating operation?

I'm especially interested in practical terms in relation to video game consoles. For example, does the Nintendo 64 have a 64 bit processor and if it does then would that mean it was capable of double precision floating point operations? Can the PS3 and Xbox 360 pull off double precision floating point operations or only single precision and in general use is the double precision capabilities made use of (if they exist?).

回答1:

Note: the Nintendo 64 does have a 64-bit processor, however:

Many games took advantage of the chip's 32-bit processing mode as the greater data precision available with 64-bit data types is not typically required by 3D games, as well as the fact that processing 64-bit data uses twice as much RAM, cache, and bandwidth, thereby reducing the overall system performance.

From Webopedia:

The term double precision is something of a misnomer because the precision is not really double.
The word double derives from the fact that a double-precision number uses twice as many bits as a regular floating-point number.
For example, if a single-precision number requires 32 bits, its double-precision counterpart will be 64 bits long.

The extra bits increase not only the precision but also the range of magnitudes that can be represented.
The exact amount by which the precision and range of magnitudes are increased depends on what format the program is using to represent floating-point values.
Most computers use a standard format known as the IEEE floating-point format.

From the IEEE standard for floating point arithmetic

Single Precision

The IEEE single precision floating point standard representation requires a 32 bit word, which may be represented as numbered from 0 to 31, left to right.

• The first bit is the sign bit, S,
• the next eight bits are the exponent bits, 'E', and

• the final 23 bits are the fraction 'F':

  S EEEEEEEE FFFFFFFFFFFFFFFFFFFFFFF
  0 1      8 9                    31
  

The value V represented by the word may be determined as follows:

• If E=255 and F is nonzero, then V=NaN ("Not a number")
• If E=255 and F is zero and S is 1, then V=-Infinity
• If E=255 and F is zero and S is 0, then V=Infinity
• If 0<E<255 then V=(-1)**S * 2 ** (E-127) * (1.F) where "1.F" is intended to represent the binary number created by prefixing F with an implicit leading 1 and a binary point.
• If E=0 and F is nonzero, then V=(-1)**S * 2 ** (-126) * (0.F). These are "unnormalized" values.
• If E=0 and F is zero and S is 1, then V=-0
• If E=0 and F is zero and S is 0, then V=0

In particular,

0 00000000 00000000000000000000000 = 0
1 00000000 00000000000000000000000 = -0

0 11111111 00000000000000000000000 = Infinity
1 11111111 00000000000000000000000 = -Infinity

0 11111111 00000100000000000000000 = NaN
1 11111111 00100010001001010101010 = NaN

0 10000000 00000000000000000000000 = +1 * 2**(128-127) * 1.0 = 2
0 10000001 10100000000000000000000 = +1 * 2**(129-127) * 1.101 = 6.5
1 10000001 10100000000000000000000 = -1 * 2**(129-127) * 1.101 = -6.5

0 00000001 00000000000000000000000 = +1 * 2**(1-127) * 1.0 = 2**(-126)
0 00000000 10000000000000000000000 = +1 * 2**(-126) * 0.1 = 2**(-127) 
0 00000000 00000000000000000000001 = +1 * 2**(-126) * 
                                     0.00000000000000000000001 = 
                                     2**(-149)  (Smallest positive value)

Double Precision

The IEEE double precision floating point standard representation requires a 64 bit word, which may be represented as numbered from 0 to 63, left to right.

• The first bit is the sign bit, S,
• the next eleven bits are the exponent bits, 'E', and

• the final 52 bits are the fraction 'F':

  S EEEEEEEEEEE FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
  0 1        11 12                                                63
  

The value V represented by the word may be determined as follows:

• If E=2047 and F is nonzero, then V=NaN ("Not a number")
• If E=2047 and F is zero and S is 1, then V=-Infinity
• If E=2047 and F is zero and S is 0, then V=Infinity
• If 0<E<2047 then V=(-1)**S * 2 ** (E-1023) * (1.F) where "1.F" is intended to represent the binary number created by prefixing F with an implicit leading 1 and a binary point.
• If E=0 and F is nonzero, then V=(-1)**S * 2 ** (-1022) * (0.F) These are "unnormalized" values.
• If E=0 and F is zero and S is 1, then V=-0
• If E=0 and F is zero and S is 0, then V=0

Reference:
ANSI/IEEE Standard 754-1985,
Standard for Binary Floating Point Arithmetic.

回答2:

I read a lot of answers but none seems to correctly explain where the word double comes from. I remember a very good explanation given by a University professor I had some years ago.

Recalling the style of VonC's answer, a single precision floating point representation uses a word of 32 bit.

• 1 bit for the sign, S
• 8 bits for the exponent, 'E'
• 24 bits for the fraction, also called mantissa, or coefficient (even though just 23 are represented). Let's call it 'M' (for mantissa, I prefer this name as "fraction" can be misunderstood).

Representation:

          S  EEEEEEEE   MMMMMMMMMMMMMMMMMMMMMMM
bits:    31 30      23 22                     0

(Just to point out, the sign bit is the last, not the first.)

A double precision floating point representation uses a word of 64 bit.

• 1 bit for the sign, S
• 11 bits for the exponent, 'E'
• 53 bits for the fraction / mantissa / coefficient (even though only 52 are represented), 'M'

Representation:

           S  EEEEEEEEEEE   MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
bits:     63 62         52 51                                                  0

As you may notice, I wrote that the mantissa has, in both types, one bit more of information compared to its representation. In fact, the mantissa is a number represented without all its non-significative 0. For example,

• 0.000124 becomes 0.124 × 10⁻³
• 237.141 becomes 0.237141 × 10³

This means that the mantissa will always be in the form

0.α₁α₂...α_t × β^p

where β is the base of representation. But since the fraction is a binary number, α₁ will always be equal to 1, thus the fraction can be rewritten as 1.α₂α₃...α_t+1 × 2^p and the initial 1 can be implicitly assumed, making room for an extra bit (α_t+1).

Now, it's obviously true that the double of 32 is 64, but that's not where the word comes from.

The precision indicates the number of decimal digits that are correct, i.e. without any kind of representation error or approximation. In other words, it indicates how many decimal digits one can safely use.

With that said, it's easy to estimate the number of decimal digits which can be safely used:

• single precision: log₁₀(2²⁴), which is about 7~8 decimal digits
• double precision: log₁₀(2⁵³), which is about 15~16 decimal digits

回答3:

Okay, the basic difference at the machine is that double precision uses twice as many bits as single. In the usual implementation,that's 32 bits for single, 64 bits for double.

But what does that mean? If we assume the IEEE standard, then a single precision number has about 23 bits of the mantissa, and a maximum exponent of about 38; a double precision has 52 bits for the mantissa, and a maximum exponent of about 308.

The details are at Wikipedia, as usual.

回答4:

To add to all the wonderful answers here

First of all float and double are both used for representation of numbers fractional numbers. So, the difference between the two stems from the fact with how much precision they can store the numbers.

For example: I have to store 123.456789 One may be able to store only 123.4567 while other may be able to store the exact 123.456789.

So, basically we want to know how much accurately can the number be stored and is what we call precision.

Quoting @Alessandro here

The precision indicates the number of decimal digits that are correct, i.e. without any kind of representation error or approximation. In other words, it indicates how many decimal digits one can safely use.

Float can accurately store about 7-8 digits in the fractional part while Double can accurately store about 15-16 digits in the fractional part

So, float can store double the amount of fractional part. That is why Double is called double the float

回答5:

As to the question "Can the ps3 and xbxo 360 pull off double precision floating point operations or only single precision and in generel use is the double precision capabilities made use of (if they exist?)."

I believe that both platforms are incapable of double floating point. The original Cell processor only had 32 bit floats, same with the ATI hardware which the XBox 360 is based on (R600). The Cell got double floating point support later on, but I'm pretty sure the PS3 doesn't use that chippery.

回答6:

Basically single precision floating point arithmetic deals with 32 bit floating point numbers whereas double precision deals with 64 bit.

The number of bits in double precision increases the maximum value that can be stored as well as increasing the precision (ie the number of significant digits).

回答7:

Double precision means the numbers takes twice the word-length to store. On a 32-bit processor, the words are all 32 bits, so doubles are 64 bits. What this means in terms of performance is that operations on double precision numbers take a little longer to execute. So you get a better range, but there is a small hit on performance. This hit is mitigated a little by hardware floating point units, but its still there.

The N64 used a MIPS R4300i-based NEC VR4300 which is a 64 bit processor, but the processor communicates with the rest of the system over a 32-bit wide bus. So, most developers used 32 bit numbers because they are faster, and most games at the time did not need the additional precision (so they used floats not doubles).

All three systems can do single and double precision floating operations, but they might not because of performance. (although pretty much everything after the n64 used a 32 bit bus so...)

回答8:

According to the IEEE754 • Standard for floating point storage • 32 and 64 bit standards (single precision and double precision) • 8 and 11 bit exponent respectively • Extended formats (both mantissa and exponent) for intermediate results

回答9:

First of all float and double are both used for representation of numbers fractional numbers. So, the difference between the two stems from the fact with how much precision they can store the numbers.

For example: I have to store 123.456789 One may be able to store only 123.4567 while other may be able to store the exact 123.456789.

So, basically we want to know how much accurately can the number be stored and is what we call precision.

Quoting @Alessandro here

The precision indicates the number of decimal digits that are correct, i.e. without any kind of representation error or approximation. In other words, it indicates how many decimal digits one can safely use.

Float can accurately store about 7-8 digits in the fractional part while Double can accurately store about 15-16 digits in the fractional part

So, double can store double the amount of fractional part as of float. That is why Double is called double the float

回答10:

Single precision number uses 32 bits, with the MSB being sign bit, whereas double precision number uses 64bits, MSB being sign bit

Single precision

SEEEEEEEEFFFFFFFFFFFFFFFFFFFFFFF.(SIGN+EXPONENT+SIGNIFICAND)

Double precision:

SEEEEEEEEEEEFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF.(SIGN+EXPONENT+SIGNIFICAND)