What is copy elision? What is (named) return value optimization? What do they imply?
In what situations can they occur? What are limitations?
For a technical overview - skip to this answer.
For common cases where copy elision occurs - skip to this answer.
Copy elision is an optimization implemented by most compilers to prevent extra (potentially expensive) copies in certain situations. It makes returning by value or pass-by-value feasible in practice (restrictions apply).
It's the only form of optimization that elides (ha!) the as-if rule - copy elision can be applied even if copying/moving the object has side-effects.
The following example taken from Wikipedia:
struct C {
C() {}
C(const C&) { std::cout << "A copy was made.\n"; }
};
C f() {
return C();
}
int main() {
std::cout << "Hello World!\n";
C obj = f();
}
Depending on the compiler & settings, the following outputs are all valid:
Hello World!
A copy was made.
A copy was made.
Hello World!
A copy was made.
Hello World!
This also means fewer objects can be created, so you also can't rely on a specific number of destructors being called. You shouldn't have critical logic inside copy/move-constructors or destructors, as you can't rely on them being called.
If a call to a copy or move constructor is elided, that constructor must still exist and must be accessible. This ensures that copy elision does not allow copying objects which are not normally copyable, e.g. because they have a private or deleted copy/move constructor.
C++17: As of C++17, Copy Elision is guaranteed when an object is returned directly:
struct C {
C() {}
C(const C&) { std::cout << "A copy was made.\n"; }
};
C f() {
return C(); //Definitely performs copy elision
}
C g() {
C c;
return c; //Maybe performs copy elision
}
int main() {
std::cout << "Hello World!\n";
C obj = f(); //Copy constructor isn't called
}
For a less technical view & introduction - skip to this answer.
For common cases where copy elision occurs - skip to this answer.
Copy elision is defined in the standard in:
as
31) When certain criteria are met, an implementation is allowed to omit the copy/move construction of a class object, even if the copy/move constructor and/or destructor for the object have side effects. In such cases, the implementation treats the source and target of the omitted copy/move operation as simply two different ways of referring to the same object, and the destruction of that object occurs at the later of the times when the two objects would have been destroyed without the optimization.123 This elision of copy/move operations, called copy elision, is permitted in the following circumstances (which may be combined to eliminate multiple copies):
— in a return statement in a function with a class return type, when the expression is the name of a non-volatile automatic object (other than a function or catch-clause parameter) with the same cvunqualified type as the function return type, the copy/move operation can be omitted by constructing the automatic object directly into the function’s return value
— in a throw-expression, when the operand is the name of a non-volatile automatic object (other than a function or catch-clause parameter) whose scope does not extend beyond the end of the innermost enclosing try-block (if there is one), the copy/move operation from the operand to the exception object (15.1) can be omitted by constructing the automatic object directly into the exception object
— when a temporary class object that has not been bound to a reference (12.2) would be copied/moved to a class object with the same cv-unqualified type, the copy/move operation can be omitted by constructing the temporary object directly into the target of the omitted copy/move
— when the exception-declaration of an exception handler (Clause 15) declares an object of the same type (except for cv-qualification) as the exception object (15.1), the copy/move operation can be omitted by treating the exception-declaration as an alias for the exception object if the meaning of the program will be unchanged except for the execution of constructors and destructors for the object declared by the exception-declaration.
123) Because only one object is destroyed instead of two, and one copy/move constructor is not executed, there is still one object destroyed for each one constructed.
The example given is:
class Thing {
public:
Thing();
~Thing();
Thing(const Thing&);
};
Thing f() {
Thing t;
return t;
}
Thing t2 = f();
and explained:
Here the criteria for elision can be combined to eliminate two calls to the copy constructor of class
Thing: the copying of the local automatic objecttinto the temporary object for the return value of functionf()and the copying of that temporary object into objectt2. Effectively, the construction of the local objecttcan be viewed as directly initializing the global objectt2, and that object’s destruction will occur at program exit. Adding a move constructor to Thing has the same effect, but it is the move construction from the temporary object tot2that is elided.
For a technical overview - skip to this answer.
For a less technical view & introduction - skip to this answer.
(Named) Return value optimization is a common form of copy elision. It refers to the situation where an object returned by value from a method has its copy elided. The example set forth in the standard illustrates named return value optimization, since the object is named.
class Thing {
public:
Thing();
~Thing();
Thing(const Thing&);
};
Thing f() {
Thing t;
return t;
}
Thing t2 = f();
Regular return value optimization occurs when a temporary is returned:
class Thing {
public:
Thing();
~Thing();
Thing(const Thing&);
};
Thing f() {
return Thing();
}
Thing t2 = f();
Other common places where copy elision takes place is when a temporary is passed by value:
class Thing {
public:
Thing();
~Thing();
Thing(const Thing&);
};
void foo(Thing t);
foo(Thing());
or when an exception is thrown and caught by value:
struct Thing{
Thing();
Thing(const Thing&);
};
void foo() {
Thing c;
throw c;
}
int main() {
try {
foo();
}
catch(Thing c) {
}
}
Common limitations of copy elision are:
Most commercial-grade compilers support copy elision & (N)RVO (depending on optimization settings).
Copy elision is a compiler optimization technique that eliminates unnecessary copying/moving of objects.
In the following circumstances, a compiler is allowed to omit copy/move operations and hence not to call the associated constructor:
#include <iostream>
using namespace std;
class ABC
{
public:
const char *a;
ABC()
{ cout<<"Constructor"<<endl; }
ABC(const char *ptr)
{ cout<<"Constructor"<<endl; }
ABC(ABC &obj)
{ cout<<"copy constructor"<<endl;}
ABC(ABC&& obj)
{ cout<<"Move constructor"<<endl; }
~ABC()
{ cout<<"Destructor"<<endl; }
};
ABC fun123()
{ ABC obj; return obj; }
ABC xyz123()
{ return ABC(); }
int main()
{
ABC abc;
ABC obj1(fun123());//NRVO
ABC obj2(xyz123());//NRVO
ABC xyz = "Stack Overflow";//RVO
return 0;
}
**Output without -fno-elide-constructors**
root@ajay-PC:/home/ajay/c++# ./a.out
Constructor
Constructor
Constructor
Constructor
Destructor
Destructor
Destructor
Destructor
**Output with -fno-elide-constructors**
root@ajay-PC:/home/ajay/c++# g++ -std=c++11 copy_elision.cpp -fno-elide-constructors
root@ajay-PC:/home/ajay/c++# ./a.out
Constructor
Constructor
Move constructor
Destructor
Move constructor
Destructor
Constructor
Move constructor
Destructor
Move constructor
Destructor
Constructor
Move constructor
Destructor
Destructor
Destructor
Destructor
Destructor
Even when copy elision takes place and the copy-/move-constructor is not called, it must be present and accessible (as if no optimization happened at all), otherwise the program is ill-formed.
You should permit such copy elision only in places where it won’t affect the observable behavior of your software. Copy elision is the only form of optimization permitted to have (i.e. elide) observable side-effects. Example:
#include <iostream>
int n = 0;
class ABC
{ public:
ABC(int) {}
ABC(const ABC& a) { ++n; } // the copy constructor has a visible side effect
}; // it modifies an object with static storage duration
int main()
{
ABC c1(21); // direct-initialization, calls C::C(42)
ABC c2 = ABC(21); // copy-initialization, calls C::C( C(42) )
std::cout << n << std::endl; // prints 0 if the copy was elided, 1 otherwise
return 0;
}
Output without -fno-elide-constructors
root@ajay-PC:/home/ayadav# g++ -std=c++11 copy_elision.cpp
root@ajay-PC:/home/ayadav# ./a.out
0
Output with -fno-elide-constructors
root@ajay-PC:/home/ayadav# g++ -std=c++11 copy_elision.cpp -fno-elide-constructors
root@ajay-PC:/home/ayadav# ./a.out
1
GCC provides the -fno-elide-constructors option to disable copy elision.
If you want to avoid possible copy elision, use -fno-elide-constructors.
Now almost all compilers provide copy elision when optimisation is enabled (and if no other option is set to disable it).
With each copy elision, one construction and one matching destruction of the copy are omitted, thus saving CPU time, and one object is not created, thus saving space on the stack frame.
