quickfix/n error:'An Existing was forcibly clo

I have created a Fix application using QuickFIX/n is v1.4.0 from this http://www.quickfixn.org/download site. When I executed an application using two Pcs one as Server and Client, it gave an error:

An Existing was forcibly closed the remote host at Quickfix.SocketInitiatorThread.Read()

And Log details are:

20130814-23:23:47.828 : Created session
20130814-23:24:07.531 : FIX.4.4:Server->Client Socket Reader 6044116 accepting session FIX.4.4:Server->Client from 192.168.1.109:3300
20130814-23:24:07.531 : FIX.4.4:Server->Client Acceptor heartbeat set to 0 seconds
20130814-23:24:07.781 : Session reset: ResetOnLogon
20130814-23:24:07.796 : Sending time accuracy problem
20130814-23:24:07.812 : Message 1 Rejected: 10
20130814-23:24:07.812 : Verify failed: Tried to send a reject while not logged on
20130814-23:24:07.812 : Session FIX.4.4:Server->Client disconnecting: Verify failed: Tried to send a reject while not logged on
20130814-23:24:07.812 : Session reset: ResetOnDisconnect

We have tried for 'Sending time accuracy problem' i.e. Timestamp error. We set the time on client and server machines same and tried it but it didn't work. We also set the values of MaxLatency and CheckLatency in config file. We set MaxLatency=120 and CheckLatency=Y but it didn't solve the problem.Please can you give me solution for this issue.

The actual log messages are:

20130816-05:44:37.875 : 8=FIX.4.49=6735=A34=149=Client52=20130816-23:12:39.56256=Server98=0108=3010=223
20130816-05:44:39.437 : 8=FIX.4.49=6735=A34=349=Client52=20130816-23:12:41.40656=Server98=0108=3010=215
20130816-05:44:40.468 : 8=FIX.4.49=6735=A34=449=Client52=20130816-23:12:42.40656=Server98=0108=3010=217
20130816-06:46:02.843 : 8=FIX.4.49=7335=A34=149=Client52=20130817-00:13:43.04656=Server98=0108=30141=Y10=254
20130816-06:46:04.515 : 8=FIX.4.49=7335=A34=149=Client52=20130817-00:13:45.89056=Server98=0108=30141=Y10=007
20130816-06:46:05.515 : 8=FIX.4.49=7335=A34=149=Client52=20130817-00:13:46.89056=Server98=0108=30141=Y10=008
20130816-06:46:10.359 : 8=FIX.4.49=7335=A34=149=Client52=20130817-00:13:51.62556=Server98=0108=30141=Y10=000

Please kindly send me suggestions and settings to run this application without errors.

It looks like someone else answered your identical question 2 days ago, correctly identifying that the CheckLatency setting is, for whatever reason hard-coded in QuickFIX/n. In other words, it does not matter whether CheckLatency=Y or CheckLatency=N in your configuration file because it will be ignored when the configuration is loaded.

Again, as the other poster indicated, you can fix this in the QuickFIX/n source and rebuild the assembly.

The other option here is to change the Session's CheckLatency property to false in your code before the connection is initiated.