I create project Hello JNI and write state to test leak such as:
int* requieData = malloc(sizeof(int)*100);
This is my script build_valgrind.sh I can run ./configure but does not any valgrind log can show.
My build_valgrind.sh:
#!/usr/bin/env bash
#set -x
function extract()
{
if [ -f "$1" ] ; then
case "$1" in
*.tar.bz2) tar xvjf "$1" ;;
*.tar.gz) tar xvzf "$1" ;;
*.bz2) bunzip2 "$1" ;;
*.rar) unrar x "$1" ;;
*.gz) gunzip "$1" ;;
*.tar) tar xvf "$1" ;;
*.tbz2) tar xvjf "$1" ;;
*.tgz) tar xvzf "$1" ;;
*.zip) unzip "$1" ;;
*.Z) uncompress "$1" ;;
*.7z) 7z x "$1" ;;
*) echo "$1 cannot be extracted via >extract<" ;;
esac
else
echo "'$1' is not a valid file"
fi
}
RUN_HELLO_JNI_THROUGH_VALGRIND=true
VALGRIND_VERSION="3.13.0"
VALGRIND_EXTENSION=".tar.bz2"
VALGRIND_DIRECTORY="valgrind-${VALGRIND_VERSION}"
VALGRIND_TARBALL="valgrind-${VALGRIND_VERSION}${VALGRIND_EXTENSION}"
# Only download Valgrind tarball again if not already downloaded
if [[ ! -f "${VALGRIND_TARBALL}" ]]; then
wget -v -nc "ftp://sourceware.org/pub/valgrind/${VALGRIND_TARBALL}"
fi
# Only extract Valgrind tarball again if not already extracted
if [[ ! -d "$VALGRIND_DIRECTORY" ]]; then
extract "$VALGRIND_TARBALL"
fi
echo "HOME: $HOME"
export ANDROID_NDK_HOME="$HOME/Android/Sdk/ndk-bundle"
# Ensure ANDROID_NDK_HOME is set
if [[ ! -z "$ANDROID_NDK_HOME" ]]; then
export ANDROID_NDK_HOME="$HOME/Android/Sdk/ndk-bundle"
fi
echo "NDK: $ANDROID_NDK_HOME"
# Ensure ANDOID_SDK_HOME is set
export ANDROID_SDK_HOME="$HOME/Android/Sdk/"
if [[ ! -z "$ANDROID_SDK_HOME" ]]; then
export ANDROID_SDK_HOME="$HOME/Android/Sdk/"
fi
echo "SDK: $ANDROID_SDK_HOME"
if [[ ! -d "$VALGRIND_DIRECTORY" ]];
then
echo "Problem with extracting Valgrind from $VALGRIND_TARBALL into $VALGRIND_DIRECTORY!!!"
exit -1
fi
echo "VALGRIND: $VALGRIND_DIRECTORY"
# Move to extracted directory
cd "$VALGRIND_DIRECTORY"
# ARM Toolchain
ARCH_ABI="arm-linux-androideabi-4.9"
export AR="$ANDROID_NDK_HOME/toolchains/${ARCH_ABI}/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ar"
export LD="$ANDROID_NDK_HOME/toolchains/${ARCH_ABI}/prebuilt/linux-x86_64/bin/arm-linux-androideabi-ld"
export CC="$ANDROID_NDK_HOME/toolchains/${ARCH_ABI}/prebuilt/linux-x86_64/bin/arm-linux-androideabi-gcc"
export CXX="$ANDROID_NDK_HOME/toolchains/${ARCH_ABI}/prebuilt/linux-x86_64/bin/arm-linux-androideabi-g++"
[[ ! -d "$ANDROID_NDK_HOME" || ! -f "$AR" || ! -f "$LD" || ! -f "$CC" || ! -f "$CXX" ]] && echo "Make sure AR, LD, CC, CXX variables are defined correctly. Ensure ANDROID_NDK_HOME is defined also" && exit -1
# Configure build
export HWKIND="lenovo"
ANDROID_PLATFORM=android-18
export CPPFLAGS="--sysroot=$ANDROID_NDK_HOME/platforms/${ANDROID_PLATFORM}/arch-arm -DANDROID_HARDWARE_$HWKIND"
export CFLAGS="--sysroot=$ANDROID_NDK_HOME/platforms/${ANDROID_PLATFORM}/arch-arm"
# BUG: For some reason file command is unable to detect if the file does not exist with ! -f , it says it doesn't exist even when it does!!!
echo "VALGRIND_DIRECTORY: $VALGRIND_DIRECTORY"
# ModeBuildTest
BUILD=true
if [[ "$BUILD" = true ]];
then
./configure --prefix="/data/local/Inst" \
--host="armv7-unknown-linux" \
--target="armv7-unknown-linux" \
--with-tmpdir="/sdcard"
[[ $? -ne 0 ]] && echo "Can't configure!" && exit -1
# Determine the number of jobs (commands) to be run simultaneously by GNU Make
NO_CPU_CORES=$(grep -c ^processor /proc/cpuinfo)
if [ $NO_CPU_CORES -le 8 ]; then
JOBS=$(($NO_CPU_CORES+1))
else
JOBS=${NO_CPU_CORES}
fi
# Compile Valgrind
make -j "${JOBS}"
[[ $? -ne 0 ]] && echo "Can't compile!" && exit -1
# Install Valgrind locally
make -j "${JOBS}" install DESTDIR="$(pwd)/Inst"
[[ $? -ne 0 ]] && echo "Can't install!" && exit -1
fi
# Push local Valgrind installtion to the phone
if [[ $(adb shell ls -ld /data/local/Inst/bin/valgrind) = *"No such file or directory"* ]];
then
adb root
adb remount
adb shell "[ ! -d /data/local/Inst ] && mkdir /data/local/Inst"
adb push Inst /
adb shell "ls -l /data/local/Inst"
# Ensure Valgrind on the phone is running
adb shell "/data/local/Inst/bin/valgrind --version"
# Add Valgrind executable to PATH (this might fail)
adb shell "export PATH=$PATH:/data/local/Inst/bin/"
echo "Push local Valgrind installtion"
fi
echo "Buil Valgrind end"
if [ $RUN_HELLO_JNI_THROUGH_VALGRIND = true ];
then
PACKAGE="com.example.hellojni"
# The location of the Hello JNI sample application
HELLO_JNI_PATH="$HOME/Documents/Project/HelloJNI"
# Workaround INSTALL_PARSE_FAILED_INCONSISTENT_CERTIFICATES error
adb uninstall "$PACKAGE"
cd $HELLO_JNI_PATH
./gradlew assembleArmDebug
./gradlew installArmDebug
# Build Hello JNI project in debug mode and install it on the device
echo "Finish Installation"
# Start HelloJNI app
#adb shell am start -a android.intent.action.MAIN -n $PACKAGE/.HelloJni
cd $HOME/Documents/Application/valgrindTool
# Make the script executable
chmod a+x bootstrap_valgrind.sh
# Run application through Valgrind on the phone
/usr/bin/env bash bootstrap_valgrind.sh
adb shell ls -lR "/sdcard/*grind*"
adb shell ls -lR "/storage/sdcard0/*grind*"
adb shell ls -lR "/storage/sdcard1/*grind*"
fi
echo "Call helloWord"
exit 0
And this is bootstrap_valgrind.sh
#!/usr/bin/env bash
PACKAGE="com.example.hellojni"
adb push start_valgrind.sh /data/local/
adb shell chmod 777 /data/local/start_valgrind.sh
adb root
adb shell setprop wrap.$PACKAGE "logwrapper /data/local/start_valgrind.sh"
echo "wrap.$PACKAGE: $(adb shell getprop wrap.$PACKAGE)"
adb shell am force-stop $PACKAGE
adb shell am start -a android.intent.action.MAIN -n $PACKAGE/.HelloJni
adb logcat -c
adb logcat
exit 0
This is start_valgrind.sh
# Define the package name
PACKAGE="com.example.hellojni"
# Memcheck tool: a memory error detector
VGPARAMS='-v --error-limit=no --log-file=/sdcard/hellojni.log.%p --leak-check=yes --leak-resolution=high --show-reachable=yes --undef-value-errors --read-var-info=yes'
# Massif tool: a heap profiler
# VGPARAMS='-v --error-limit=no --trace-children=yes --log-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.log.%p --tool=massif --massif-out-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.massif.out.%p'
# Callgrind tool: a cache and branch-prediction profiler
# VGPARAMS='-v --error-limit=no --trace-children=yes --log-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.log.%p --tool=callgrind --callgrind-out-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.callgrind.out.%p'
# Helgrind tool: a thread error detector
# VGPARAMS='-v --error-limit=no --trace-children=yes --log-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.log.%p --tool=helgrind --helgrind-out-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.helgrind.out.%p'
# DHAT: a dynamic heap analysis tool
# VGPARAMS='-v --error-limit=no --trace-children=yes --log-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.log.%p --tool=exp-dhat --exp-dhat-out-file=/sdcard/enzo_lync_profiles/enzo_lync_profile.dhat.out.%p'
export TMPDIR=/data/local/Ints/
exec /data/local/Inst/bin/valgrind $VGPARAMS $*
My device armeabi-v7(show by android studio) but when I use this cript, device show:
Hello from JNI leak valgrind ! Compiled with ABI armeabi.
My question: Why output show armeabi? I think it is armeabi-v7. And I can not see anylog about memory leak. What is wrong in the script? Thank you so much.
