问题的kbhit（）[和的getch（）]为Linux(Problem with kbhit()[a

while(ch != 'q') 
{
  printf("looping\n");
  sleep(1);
  if(kbhit()) 
   {
    ch = readch();
    printf("you hit %c\n",ch);
   }
}

此代码给了我一个阻塞的getch（）一样的功能。我想利用这个代码捕获上下箭头键。

补充：试图捕捉的键码向上箭头给了我3个字符27，91和65使用的if / else我试图模式匹配，但我只得到2个字符。当按下一个键下一个被捕获。

我想用getchar函数（），而一直在寻找某些键的所有时间（ESC，删除等）来捕获完整的单词。

Answer 1:

这个例子可以帮助：

raw.c - 原始模式示范

/* Raw mode demo */
/* See exactly what is being transmitted from the terminal. To do this
   we have to be more careful. */

#include <stdio.h>
#include <signal.h>
#include <termios.h>
#include <stdlib.h>
#include <unistd.h>

struct termios oldtermios;

int ttyraw(int fd)
{
    /* Set terminal mode as follows:
       Noncanonical mode - turn off ICANON.
       Turn off signal-generation (ISIG)
        including BREAK character (BRKINT).
       Turn off any possible preprocessing of input (IEXTEN).
       Turn ECHO mode off.
       Disable CR-to-NL mapping on input.
       Disable input parity detection (INPCK).
       Disable stripping of eighth bit on input (ISTRIP).
       Disable flow control (IXON).
       Use eight bit characters (CS8).
       Disable parity checking (PARENB).
       Disable any implementation-dependent output processing (OPOST).
       One byte at a time input (MIN=1, TIME=0).
    */
    struct termios newtermios;
    if(tcgetattr(fd, &oldtermios) < 0)
        return(-1);
    newtermios = oldtermios;

    newtermios.c_lflag &= ~(ECHO | ICANON | IEXTEN | ISIG);
    /* OK, why IEXTEN? If IEXTEN is on, the DISCARD character
       is recognized and is not passed to the process. This 
       character causes output to be suspended until another
       DISCARD is received. The DSUSP character for job control,
       the LNEXT character that removes any special meaning of
       the following character, the REPRINT character, and some
       others are also in this category.
    */

    newtermios.c_iflag &= ~(BRKINT | ICRNL | INPCK | ISTRIP | IXON);
    /* If an input character arrives with the wrong parity, then INPCK
       is checked. If this flag is set, then IGNPAR is checked
       to see if input bytes with parity errors should be ignored.
       If it shouldn't be ignored, then PARMRK determines what
       character sequence the process will actually see.

       When we turn off IXON, the start and stop characters can be read.
    */

    newtermios.c_cflag &= ~(CSIZE | PARENB);
    /* CSIZE is a mask that determines the number of bits per byte.
       PARENB enables parity checking on input and parity generation
       on output.
    */

    newtermios.c_cflag |= CS8;
    /* Set 8 bits per character. */

    newtermios.c_oflag &= ~(OPOST);
    /* This includes things like expanding tabs to spaces. */

    newtermios.c_cc[VMIN] = 1;
    newtermios.c_cc[VTIME] = 0;

    /* You tell me why TCSAFLUSH. */
    if(tcsetattr(fd, TCSAFLUSH, &newtermios) < 0)
        return(-1);
    return(0);
}

int ttyreset(int fd)
{
    if(tcsetattr(fd, TCSAFLUSH, &oldtermios) < 0)
        return(-1);

    return(0);
}

void sigcatch(int sig)
{
    ttyreset(0);
    exit(0);
}

int main()
{
    int i;
    char c;

    /* Catch the most popular signals. */
    if((int) signal(SIGINT,sigcatch) < 0)
    {
        perror("signal");
        exit(1);
    }
    if((int)signal(SIGQUIT,sigcatch) < 0)
    {
        perror("signal");
        exit(1);
    }
    if((int) signal(SIGTERM,sigcatch) < 0)
    {
        perror("signal");
        exit(1);
    }

    /* Set raw mode on stdin. */
    if(ttyraw(0) < 0)
    {
        fprintf(stderr,"Can't go to raw mode.\n");
        exit(1);
    }

    while( (i = read(0, &c, 1)) == 1)
    {
        if( (c &= 255) == 0177) /* ASCII DELETE */
            break;
        printf( "%o\n\r", c);
    }

    if(ttyreset(0) < 0)
    {
        fprintf(stderr, "Cannot reset terminal!\n");
        exit(-1);
    }

    if( i < 0)
    {
        fprintf(stderr,"Read error.\n");
        exit(-1);
    }

    return 0;
}

（退格键停止演示，产地）

Answer 2:

我无法重现您的问题：

#include <unistd.h> 
#include <stdio.h> 
#include <ctype.h> 

#include "kbhit.h" /* http://linux-sxs.org/programming/kbhit.html */

int main(){
  init_keyboard();
  char ch='x';
  while( ch != 'q' ){
    printf("looping\n");
    sleep(1);
    if( kbhit() ){
      printf("you hit");
      do{
        ch = readch();
        printf(" '%c'(%i)", isprint(ch)?ch:'?', (int)ch );
      }while( kbhit() );
      puts("");
    }
  }
  close_keyboard();
}