“unrecognized selector sent to instance” error in

问题:

I created a button and added an action for it, but as soon as it invoked, I got this error:

-[NSCFDictionary numberButtonClick:]: unrecognized selector sent to instance
 0x3d03ac0 2010-03-16 22:23:58.811
 Money[8056:207] *** Terminating app
 due to uncaught exception
 'NSInvalidArgumentException', reason:'*** -[NSCFDictionary numberButtonClick:]:  unrecognized selector sent to instance 0x3d03ac0'

This is my code:

- (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil {
    if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) {
        UIButton *numberButton = [UIButton buttonWithType:UIButtonTypeCustom];        
        numberButton.frame = CGRectMake(10, 435, 46, 38);
        [numberButton setImage:[UIImage imageNamed:@"one.png"] forState:UIControlStateNormal];
        [numberButton addTarget:self action:@selector(numberButtonClick:) forControlEvents:UIControlEventTouchUpInside];
        [self.view addSubview: numberButton]; 
    }
return self;
}

-(IBAction)numberButtonClick:(id)sender{
    NSLog(@"---");
}

回答1:

It looks like you're not memory managing the view controller properly and it is being deallocated at some point - which causes the numberButtonClicked: method to be sent to another object that is now occupying the memory that the view controller was previously occupying...

Make sure you're properly retaining/releasing your view controller.

回答2:

For those getting here via Google like I did, which probably pertains more to Xcode 4.2+/iOS 5+ more, what with ARC. I had the same error "unrecognized selector sent to instance". In my case I had a UIButton's target action set up to pass itself as the sender parameter, but later realised I didn't need it and removed that in code. So, something like:

- (IBAction)buttonPressed:(UIButton *)sender {

Was changed to:

- (IBAction)buttonPressed {

Right clicking the UIButton in question showed that the Touch Up Inside event was associated with the view controllers buttonPressed: method. Removing this and reassigning it to the modified method worked a treat.

回答3:

This was the top Google answer for this issue, but I had a different cause/result - I thought I'd add in my two cents in case others stumble across this problem.

I had a similar issue just this morning. I found that if you right click the UI item giving you the issue, you can see what connections have been created. In my case I had a button wired up to two actions. I deleted the actions from the right-click menu and rewired them up and my problem was fixed.

So make sure you actions are wired up right.

回答4:

OK, I have to chip in here. The OP dynamically created the button. I had a similar issue and the answer (after hours of hunting) is so simple it made me sick.

When using:

action:@selector(xxxButtonClick:)

or (as in my case)

action:NSSelectorFromString([[NSString alloc] initWithFormat:@"%@BtnTui:", name.lowercaseString])

If you place a colon at the end of the string - it will pass the sender. If you do not place the colon at the end of the string it will not, and the receiver will get an error if it expects one. It is easy to miss the colon if you are dynamically creating the event name.

The receiver code options look like this:

- (void)doneBtnTui:(id)sender {
  NSLog(@"Done Button - with sender");
}
 or
- (void)doneBtnTui {
  NSLog(@"Done Button - no sender");
}

As usual, it is always the obvious answer that gets missed.

回答5:

In my case the function was not expecting an argument but the button was configured to send one causing the error. To fix this I had to rewire the event handler.

Here is my function:

Notice it contains no arguments.

Here is an image of my button configuration (right click on the button to view it):

Notice there are 3 event handlers.

To fix this I had to remove each of the event items since one of them was sending a reference to itself to the enterPressed function. To remove these items I clicked on the little x icon next to the name of each item until there were no items shown.

Next I had to reconnect the button to the event. To do this hold down the Control key and then drag a line from the button to the action. It should say "Connect Action". Note: I had to restart XCode for this to work for some reason; otherwise it only let me insert actions (aka create a new action) above or below the function.

You should now have a single event handler wired to the button event that passes no arguments:

This answer compliments the answer by @Leonard Challis which you should read as well.

回答6:

This can also happen if you don't set the "Class" of the view in interface builder.

回答7:

In my case, I was using NSNotificationCenter and was attempting to use a selector that took no arguments, but was adding a colon. Removing the colon fixed the problem.

When using a selector name, don't use a trailing colon if there are no arguments. If there's one argument, use one trailing colon. If there are more than one argument, you must name them along with a trailing colon for each argument.

See Adam Rosenfield's answer here: Selectors in Objective C

回答8:

I had this problem with a Swift project where I'm creating the buttons dynamically. Problem code:

var trashBarButtonItem: UIBarButtonItem {
    return UIBarButtonItem(barButtonSystemItem: .Add, target: self, action: "newButtonClicked")
}

func newButtonClicked(barButtonItem: UIBarButtonItem) {
    NSLog("A bar button item on the default toolbar was clicked: \(barButtonItem).")
}

The solution was to add a full colon ':' after the action: e.g.

var trashBarButtonItem: UIBarButtonItem {
        return UIBarButtonItem(barButtonSystemItem: .Add, target: self, action: "newButtonClicked:")
    }

    func newButtonClicked(barButtonItem: UIBarButtonItem) {
        NSLog("A bar button item on the default toolbar was clicked: \(barButtonItem).")
    }

Full example here: https://developer.apple.com/library/content/samplecode/UICatalog/Listings/Swift_UIKitCatalog_DefaultToolbarViewController_swift.html

回答9:

The most obvious cause of this (included for completeness) is improperly casting a pointer and calling a method of the wrong class.

NSArray* array = [[NSArray alloc] init];
[(NSDictionary*)array objectForKey: key]; // array is not a dictionary, hence exception

回答10:

I had a similar problem, but for me the solution was slightly different. In my case, I used a Category to extend an existing class (UIImage for some resizing capabilities - see this howto in case you're interested) and forgot to add the *.m file to the build target. Stupid error, but not always obvious when it happens where to look. I thought it's worth sharing...

回答11:

I had the same error and I discovered the following:

When you use the code

[self.refreshControl addTarget:self action:@selector(yourRefreshMethod:) forControlEvents:UIControlEventValueChanged];

You may think it's looking for the selector:

- (void)yourRefreshMethod{
    (your code here)
}

But it's actually looking for the selector:

- (void)yourRefreshMethod:(id)sender{
    (your code here)
}

That selector doesn't exist, so you get the crash.

You can change the selector to receive (id)sender in order to solve the error.

But what if you have other functions that call the refresh function without providing a sender? You need one function that works for both. Easy solution is to add another function:

- (void)yourRefreshMethodWithSender:(id)sender{
    [self yourRefreshMethod];
}

And then modify the refresh pulldown code to call that selector instead:

[self.refreshControl addTarget:self action:@selector(yourRefreshMethodWithSender:) forControlEvents:UIControlEventValueChanged];

I'm also doing the Stanford iOS course on an older Mac that can't be upgraded to the newest version of Mac OSX. So I'm still building for iOS 6.1, and this solved the problem for me.

回答12:

I think you should use the void, instead of the IBAction in return type. because you defined a button programmatically.

回答13:

I also had the same issue.

I deleted my uibutton in my storyboard and recreated it .. now everything works fine.

回答14:

This happened to my because accidentally erase the " @IBAction func... " inside my UIViewcontroller class code, so in the Storyboard was created the Reference Outlet, but at runtime there was any function to process it.

The solution was to delete the Outlet reference inside the property inspector and then recreate it dragging with command key to the class code.

Hope it helps!

回答15:

I'm currently learning iOS development and going through the "Beginning iOS6 Development" book by aPress. I was getting the same error in Chapter 10:Storyboards.

It took me two days to figure it out but found out I accidentally set the TableView cell's tag to 1 when I shouldn't have. For anyone else doing this book and receive a similar error I hope this helps.

I really hope future errors in my code are easier to find! hahaha. The debug error did nothing to push me in the right direction to figuring it out (or at least I'm too new to understand the debugger, lol).

回答16:

In my case I was using a UIWebView and I passed a NSString in the second parameter instead of a NSURL. So I suspect that wrong class types passed to a functions can cause this error.

回答17:

..And now mine

I had the button linked to a method which accessed another button's parameter and that worked great BUT as soon I tried to do something with the button itself, I got a crash. While compiling, no error has been displayed.. Solution?

I failed to link the button to the file's owner. So if anyone here is as stupid as me, try this :)

回答18:

Yet another slightly different solution/case.

I am using Xamarin and MvvmCross and I was trying to bind the UIButton to a ViewModel. I had the UIButton wired up to an Outlet and a TouchUpInside.

When Binding I only use the Outlet:

set.Bind (somethingOutlet).For ("TouchUpInside").To(vm => vm.Something);

All I had to do was remove the action (TouchUpInside) connection in XCode and that solved it.

P.S. I guess this is in its base all related to the previous answers and to @Chris Kaminski in particular, but I hope this helps someone...

Cheers.

回答19:

I had the same issue. The problem for me was that one button had two Action methods. What I did was create a first action method for my button and then deleted it in the view controller, but forgot to disconnect the connection in the main storyboard in the connection inspector. So when I added a second action method, there were now two action methods for one button, which caused the error.

回答20:

For me, it was a leftover connection created in interfacebuilder bij ctrl-dragging. The name of the broken connection was in the error-log

*** Terminating app due to uncaught exception 'NSInvalidArgumentException',
reason: '-[NameOfYourApp.NameOfYourClass nameOfCorruptConnection:]:
unrecognized selector sent to instance 0x7f97a48bb000'

I had an action linked to a button. Pressing the button crashed the app because the Outlet no longer existed in my code. Searching for the name in the log led me to it in the storyboard. Deleted it, and the crash was gone!

回答21:

On my case I solved the problem after 2 hours :

The sender (a tabBar item) wasn't having any Referencing Outlet. So it was pointing nowhere.

Juste create a referencing outlet corresponding to your function.

Hope this could help you guys.

回答22:

I'm replying to Leonard Challis, since I was also taking the Stanford iOS class C193P, as was user "oli206"

"Terminating app due to uncaught exception 'NSInvalidArgumentException', reason:"

The problem was that I had the "Enter" button on the calculator connected twice,and a friend pointed out that doing an inspection of the button in the Storyboard showed that 2 entries were on the "Touch Up Inside" attributes when I right clicked on the "Enter" button. Erasing one of the two "Touch Up Inside" "Sent Events" solved the problem.

This showed that the problem is triggered (for the C193P video class on the Calculator Walkthrough on Assignment 1) as 2 sent events, one of which was causing the exception.

回答23:

It can happen when you do not assign the ViewController to the ViewControllerScene in the InterfaceBuilder. So the ViewController.m is not connected to any scene.

回答24:

Including my share. I got stuck on this for a while, until I realized I've created a project with ARC(Automatic counting reference) disabled. A quick set to YES on that option solved my issue.

回答25:

Another really silly cause of this is having the selector defined in the interface(.h) but not in the implementation(.m) (p.e. typo)

回答26:

Another reason/solution to add to the list. This one is caused by iOS6.0 (and/or bad programming). In older versions the selector would match if the parameter types matched, but in iOS 6.0 I got crashes in previously working code where the name of the parameter wasn't correct.

I was doing something like

[objectName methodName:@"somestring" lat:latValue lng:lngValue];

but in the definition (both .h and .m) I had

(viod) methodName:(NSString *) latitude:(double)latitude longitude:(double)longitude;

This worked fine on iOS5 but not on 6, even the exact same build deployed to different devices.

I don't get why the compiler coudn't tell me this, anyway - problem soled.

回答27:

This also might happen when you want to set a property from a ControllerA to a public property inside a custom ControllerB class and you haven't set the "Custom Class" inside the identity inspector in storyboards yet.

回答28:

Another possible solution: Add '-ObjC' to your linker arguments.

Full explanation is here: Objective-C categories in static library

I think the gist is: if the category is defined in a library you are statically linking with, the linker isn't smart enough to link in category methods. The flag above makes the linker link in all objective C classes and categories, not just ones it thinks it needs to based on analyzing your source. (Please feel free to tune or correct that answer. I'm knew to linked languages, so I'm just parroting here).

回答29:

My problem and solution was different and I thought I should post it here so that future readers can save their head from banging to the wall.

I was allocating different xib to same UIVIewController and even after searching everywhere I couldn't find how to correct it. Then I checked my AppDelegate where I was calling initWithNibName and can see that while copying the code, I changed the xib name, but forgot to change UIViewController class. So if none of the solution works for you, check your initWithNibName method.

回答30:

Happened to me because of conflicting constraint arguments.