ASP.NET: Session.SessionID changes between request

问题:

Why does the property SessionID on the Session-object in an ASP.NET-page change between requests?

I have a page like this:

...
<div>
    SessionID: <%= SessionID %>
</div>
...

And the output keeps changing every time I hit F5, independent of browser.

回答1:

This is the reason

When using cookie-based session state, ASP.NET does not allocate storage for session data until the Session object is used. As a result, a new session ID is generated for each page request until the session object is accessed. If your application requires a static session ID for the entire session, you can either implement the Session_Start method in the application's Global.asax file and store data in the Session object to fix the session ID, or you can use code in another part of your application to explicitly store data in the Session object.

http://msdn.microsoft.com/en-us/library/system.web.sessionstate.httpsessionstate.sessionid.aspx

So basically, unless you access your session object on the backend, a new sessionId will be generated with each request

EDIT

This code must be added on the file Global.asax. It adds an entry to the Session object so you fix the session until it expires.

protected void Session_Start(Object sender, EventArgs e) 
{
    Session["init"] = 0;
}

回答2:

There is another, more insidious reason, why this may occur even when the Session object has been initialized as demonstrated by Cladudio.

In the Web.config, if there is an <httpCookies> entry that is set to requireSSL="true" but you are not actually using HTTPS: for a specific request, then the session cookie is not sent (or maybe not returned, I'm not sure which) which means that you end up with a brand new session for each request.

I found this one the hard way, spending several hours going back and forth between several commits in my source control, until I found what specific change had broken my application.

回答3:

In my case I figured out that the session cookie had a domain that included www. prefix, while I was requesting page with no www..
Adding www. to the URL immediately fixed the problem. Later I changed cookie's domain to be set to .mysite.com instead of www.mysite.com.

回答4:

Using Neville's answer (deleting requireSSL = true, in web.config) and slightly modifying Joel Etherton's code, here is the code that should handle a site that runs in both SSL mode and non SSL mode, depending on the user and the page (I am jumping back into code and haven't tested it on SSL yet, but expect it should work - will be too busy later to get back to this, so here it is:

if (HttpContext.Current.Response.Cookies.Count > 0)
        {
            foreach (string s in HttpContext.Current.Response.Cookies.AllKeys)
            {
                if (s == FormsAuthentication.FormsCookieName || s.ToLower() == "asp.net_sessionid")
                {
                    HttpContext.Current.Response.Cookies[s].Secure = HttpContext.Current.Request.IsSecureConnection;
                }
            }
        }

回答5:

Another possibility that causes the SessionID to change between requests, even when Session_OnStart is defined and/or a Session has been initialized, is that the URL hostname contains an invalid character (such as an underscore). I believe this is IE specific (not verified), but if your URL is, say, http://server_name/app, then IE will block all cookies and your session information will not be accessible between requests.

In fact, each request will spin up a separate session on the server, so if your page contains multiple images, script tags, etc., then each of those GET requests will result in a different session on the server.

Further information: http://support.microsoft.com/kb/316112

回答6:

My issue was with a Microsoft MediaRoom IPTV application. It turns out that MPF MRML applications don't support cookies; changing to use cookieless sessions in the web.config solved my issue

<sessionState cookieless="true"  />

Here's a REALLY old article about it: Cookieless ASP.NET

回答7:

my problem was that we had this set in web.config

<httpCookies httpOnlyCookies="true" requireSSL="true" />

this means that when debugging in non-SSL (the default), the auth cookie would not get sent back to the server. this would mean that the server would send a new auth cookie (with a new session) for every request back to the client.

the fix is to either set requiressl to false in web.config and true in web.release.config or turn on SSL while debugging:

回答8:

In my case this was happening a lot in my development and test environments. After trying all of the above solutions without any success I found that I was able to fix this problem by deleting all session cookies. The web developer extension makes this very easy to do. I mostly use Firefox for testing and development, but this also happened while testing in Chrome. The fix also worked in Chrome.

I haven't had to do this yet in the production environment and have not received any reports of people not being able to log in. This also only seemed to happen after making the session cookies to be secure. It never happened in the past when they were not secure.

回答9:

in my case it was because I was modifying session after redirecting from a gateway in an external application, so because I was using IP instead on localhost in that page url it was actually considered different website with different sessions.

In summary

pay more attention if you are debugging a hosted application on IIS instead of IIS express and mixing your machine http://Ip and http://localhost in various pages

回答10:

Be sure that you do not have a session timeout that is very short, and also make sure that if you are using cookie based sessions that you are accepting the session.

The FireFox webDeveloperToolbar is helpful at times like this as you can see the cookies set for your application.

回答11:

Session ID resetting may have many causes. However any mentioned above doesn't relate to my problem. So I'll describe it for future reference.

In my case a new session created on each request resulted in infinite redirect loop. The redirect action takes place in OnActionExecuting event.

Also I've been clearing all http headers (also in OnActionExecuting event using Response.ClearHeaders method) in order to prevent caching sites on client side. But that method clears all headers including informations about user's session, and consequently all data in Temp storage (which I was using later in program). So even setting new session in Session_Start event didn't help.

To resolve my problem I ensured not to remove the headers when a redirection occurs.

Hope it helps someone.

回答12:

I ran into this issue a different way. The controllers that had this attribute [SessionState(SessionStateBehavior.ReadOnly)] were reading from a different session even though I had set a value in the original session upon app startup. I was adding the session value via the _layout.cshtml (maybe not the best idea?)

It was clearly the ReadOnly causing the issue because when I removed the attribute, the original session (and SessionId) would stay in tact. Using Claudio's/Microsoft's solution fixed it.

回答13:

I'm on .NET Core 2.1 and I'm well aware that the question isn't about Core. Yet the internet is lacking and Google brought me here so hoping to save someone a few hours.

---

Startup.cs

services.AddCors(o => o.AddPolicy("AllowAll", builder =>
            {
                builder
                    .WithOrigins("http://localhost:3000")     // important
                    .AllowCredentials()                       // important
                    .AllowAnyMethod()
                    .AllowAnyHeader();       // obviously just for testing
            }));

client.js

const resp = await fetch("https://localhost:5001/api/user", {
            method: 'POST',
            credentials: 'include',                           // important
            headers: {
                'Content-Type': 'application/json'
            },
            body: JSON.stringify(data)
        })

Controllers/LoginController.cs

namespace WebServer.Controllers
{
    [Route("api/[controller]")]
    [ApiController]
    public class UserController : ControllerBase
    {
        [HttpPost]
        public IEnumerable<string> Post([FromBody]LoginForm lf)
        {
            string prevUsername = HttpContext.Session.GetString("username");
            Console.WriteLine("Previous username: " + prevUsername);

            HttpContext.Session.SetString("username", lf.username);

            return new string[] { lf.username, lf.password };
        }
    }
}

Notice that the session writing and reading works, yet no cookies seem to be passed to the browser. At least I couldn't find a "Set-Cookie" header anywhere.