drawing centered arcs in raphael js

问题:

I need to draw concentric arcs of various sizes using raphael.js. I tried to understand the code behind http://raphaeljs.com/polar-clock.html, which is very similar to what I want, but, whithout comments, it is quite difficult to fathom.

Ideally, I would need a function that creates a path that is at a given distance from some center point, starts at some angle and ends at some other angle.

回答1:

That answer is ok, but cant be animated. I ripped the important stuff out of polar-clock for you. Here is a red arc that animates growing. enjoy.

// Custom Arc Attribute, position x&y, value portion of total, total value, Radius
var archtype = Raphael("canvas", 200, 100);
archtype.customAttributes.arc = function (xloc, yloc, value, total, R) {
    var alpha = 360 / total * value,
        a = (90 - alpha) * Math.PI / 180,
        x = xloc + R * Math.cos(a),
        y = yloc - R * Math.sin(a),
        path;
    if (total == value) {
        path = [
            ["M", xloc, yloc - R],
            ["A", R, R, 0, 1, 1, xloc - 0.01, yloc - R]
        ];
    } else {
        path = [
            ["M", xloc, yloc - R],
            ["A", R, R, 0, +(alpha > 180), 1, x, y]
        ];
    }
    return {
        path: path
    };
};

//make an arc at 50,50 with a radius of 30 that grows from 0 to 40 of 100 with a bounce
var my_arc = archtype.path().attr({
    "stroke": "#f00",
    "stroke-width": 14,
    arc: [50, 50, 0, 100, 30]
});

my_arc.animate({
    arc: [50, 50, 40, 100, 30]
}, 1500, "bounce");

回答2:

Here's how I have done it. The following code allows you to specify a start and end angle as well as an inner and outer radius (useful for doing those trendy donut style pie charts). The solution doesn't rely on approximating a curve with line segments and can be animated as per the clock example mentioned in the original question.

First create your Raphael drawing area; the following assumes a div with id "raphael_paper" in your HTML file:

var paper = Raphael("raphael_paper", 800, 800);

to this Raphael object we add a custom arc attribute, a function which takes the center of a circle (x and y coords), a start angle, an end angle, an inner radius and an outer radius:

paper.customAttributes.arc = function (centerX, centerY, startAngle, endAngle, innerR, outerR) {
    var radians = Math.PI / 180,
        largeArc = +(endAngle - startAngle > 180);
        // calculate the start and end points for both inner and outer edges of the arc segment
        // the -90s are about starting the angle measurement from the top get rid of these if this doesn't suit your needs
        outerX1 = centerX + outerR * Math.cos((startAngle-90) * radians),
        outerY1 = centerY + outerR * Math.sin((startAngle-90) * radians),
        outerX2 = centerX + outerR * Math.cos((endAngle-90) * radians),
        outerY2 = centerY + outerR * Math.sin((endAngle-90) * radians),
        innerX1 = centerX + innerR * Math.cos((endAngle-90) * radians),
        innerY1 = centerY + innerR * Math.sin((endAngle-90) * radians),
        innerX2 = centerX + innerR * Math.cos((startAngle-90) * radians),
        innerY2 = centerY + innerR * Math.sin((startAngle-90) * radians);

    // build the path array
    var path = [
        ["M", outerX1, outerY1], //move to the start point
        ["A", outerR, outerR, 0, largeArc, 1, outerX2, outerY2], //draw the outer edge of the arc
        ["L", innerX1, innerY1], //draw a line inwards to the start of the inner edge of the arc
        ["A", innerR, innerR, 0, largeArc, 0, innerX2, innerY2], //draw the inner arc
        ["z"] //close the path
    ];                   
    return {path: path};
};

now we can use this to draw arcs of a specified thickness, starting and ending wherever we want them to eg.

var redParams = {stroke: "#f00", "stroke-width": 1, fill:"#eee"},
    greenParams = {stroke: "#0f0", "stroke-width": 1, fill:"#eee"},
    blueParams = {stroke: "#00f", "stroke-width": 1, fill:"#eee"},
    cx = 300, cy = 300, innerRadius = 100, outerRadius = 250,

var red = paper.path().attr(redParams).attr({arc: [cx, cy, 0, 90, innerRadius, outerRadius]}); 
var green = paper.path().attr(greenParams).attr({arc: [cx, cy, 270, 320, innerRadius, outerRadius]}); 
var blue = paper.path().attr(blueParams).attr({arc: [cx, cy, 95, 220, innerRadius, outerRadius]});

This should result in three grey arc segments with red, blue and green 1px borders.

回答3:

Actually found the answer myself. I first thought of something fancy involving bezier curves, but this just works.

-> creates a path using SVG path syntax, which works as is with raphael

function arc(center, radius, startAngle, endAngle) {
    angle = startAngle;
    coords = toCoords(center, radius, angle);
    path = "M " + coords[0] + " " + coords[1];
    while(angle<=endAngle) {
        coords = toCoords(center, radius, angle);
        path += " L " + coords[0] + " " + coords[1];
        angle += 1;
    }
    return path;
}

function toCoords(center, radius, angle) {
    var radians = (angle/180) * Math.PI;
    var x = center[0] + Math.cos(radians) * radius;
    var y = center[1] + Math.sin(radians) * radius;
    return [x, y];
}

回答4:

Just to remove some guesswork from user592699's answer, this is the complete code that works:

<script src="raphael.js"></script>
<script>

  var paper = Raphael(20, 20, 320, 320);

  function arc(center, radius, startAngle, endAngle) {
      angle = startAngle;
      coords = toCoords(center, radius, angle);
      path = "M " + coords[0] + " " + coords[1];
      while(angle<=endAngle) {
          coords = toCoords(center, radius, angle);
          path += " L " + coords[0] + " " + coords[1];
          angle += 1;
      }
      return path;
  }

  function toCoords(center, radius, angle) {
      var radians = (angle/180) * Math.PI;
      var x = center[0] + Math.cos(radians) * radius;
      var y = center[1] + Math.sin(radians) * radius;
      return [x, y];
  }

  paper.path(arc([100, 100], 80, 0, 270));  // draw an arc 
                                            // centered at (100, 100),
                                            // radius 80, starting at degree 0,
                                            // beginning at coordinate (80, 0)
                                            //   which is relative to the center
                                            //   of the circle,
                                            // going clockwise, until 270 degree

</script>

回答5:

For those who want the arc to be made with closed path and not stroke, I have extended genkilabs answer to make a solution. In cases when you need to give outer stroke to your arc, this might help.

// Custom Arc Attribute, position x&y, value portion of total, total value, Radius, width
var archtype = Raphael("canvas", 200, 100);
archtype.customAttributes.arc = function (xloc, yloc, value, total, R, width) {
    if(!width) width = R * 0.4;
    var alpha = 360 / total * value,
        a = (90 - alpha) * Math.PI / 180,
        w = width / 2,
        r1 = R + w,
        r2 = R - w,
        x1 = xloc + r1 * Math.cos(a),
        y1 = yloc - r1 * Math.sin(a),
        x2 = xloc + r2 * Math.cos(a),
        y2 = yloc - r2 * Math.sin(a),
        path;
    if (total == value) {
        path = [
            ["M", xloc, yloc - r1],
            ["A", r1, r1, 0, 1, 1, xloc - 0.01, yloc - r1],
            ["Z"],
            ["M", xloc - 0.01, yloc - r2],
            ["A", r2, r2, 0, 1, 0, xloc, yloc - r2],
            ["Z"]
        ];
    } else {
        path = [
            ["M", xloc, yloc - r1],
            ["A", r1, r1, 0, +(alpha > 180), 1, x1, y1],
            ["L", x2, y2],
            ["A", r2, r2, 0, +(alpha > 180), 0,  xloc, yloc - r2],
            ["L", xloc, yloc - r1],
            ["Z"]
        ];
    }
    return {
        path: path
    };
};

//make an arc at 50,50 with a radius of 30 that grows from 0 to 40 of 100 with a bounce
var my_arc = archtype.path().attr({
    "fill": "#00f",
    "stroke": "#f00",
    "stroke-width": 5,
    arc: [50, 50, 0, 100, 30]
});

my_arc.animate({
    arc: [50, 50, 40, 100, 30]
}, 1500, "bounce");

JSFiddle

回答6:

You can also do this without having to use loops. The following achieves this and works with negative angles as well.

Pass in a Raphael object as r. The angles start with 0 degrees, which is the top of the circle rather than the right as was listed in a couple of other solutions.

        function drawArc(r, centerX, centerY, radius, startAngle, endAngle) {
            var startX = centerX+radius*Math.cos((90-startAngle)*Math.PI/180); 
            var startY = centerY-radius*Math.sin((90-startAngle)*Math.PI/180);
            var endX = centerX+radius*Math.cos((90-endAngle)*Math.PI/180); 
            var endY = centerY-radius*Math.sin((90-endAngle)*Math.PI/180);
            var flg1 = 0;

            if (startAngle>endAngle)
                flg1 = 1;
            else if (startAngle<180 && endAngle<180)
                flg1 = 0;
            else if (startAngle>180 && endAngle>180)
                flg1 = 0;
            else if (startAngle<180 && endAngle>180)
                flg1 = 0; // edited for bugfix here, previously this was 1
            else if (startAngle>180 && endAngle<180)
                flg1 = 1;

            return r.path([['M',startX, startY],['A',radius,radius,0,flg1,1,endX,endY]]);
        };

回答7:

I have adapted genkilabs answer to include rotation and inversion abilities. Also, how much of the ring is filled was changed to a single-number percent. (The inversion was adapted from this post). Hope it's helpful!

paper.customAttributes.arc = function (xloc, yloc, percent, rad, rot, invert) {
    var alpha = 3.6 * percent,
    a = (90 - alpha) * Math.PI / 180,
    x = xloc + rad * Math.cos(a),
    y = yloc - rad * Math.sin(a),
    path;

    if (invert) {
        x = xloc - rad * Math.cos(a);
    }

    if (percent >= 100) {
        path = [
            ["M", xloc, yloc - rad],
            ["A", rad, rad, 0, 1, 1, xloc - 0.01, yloc - rad]
        ];
    } else {
        path = [
            ["M", xloc, yloc - rad],
            ["A", rad, rad, 0, +(alpha > 180), +(!invert), x, y]
        ];
        }
    return {
        path: path,
        transform: "r"+rot+","+xloc+","+yloc,
    };
};