FSM export using Yosys

问题:

i am trying out this pretty neat tool called Yosys to synthesize my Verilog designs. i want to export out the FSM in my Verilog design using the Yosys command fsm_export but it does not generate anything. I wonder how is this command supposed to be called?

the series of commands i called were: read_verilog qwerty.v ; fsm_export

if the generation is successful and i have the FSM in KISS2 format, anyone knows what (open source) tools are there to allow me to visualize the FSM?

thanks a bunch!

回答1:

The fsm_export command operates on extracted FSMs (i.e. $fsm cells). In order to create a state where the design contains such FSM cells, you first need to detect FSMs (fsm_dectect) and then extract them (fsm_extract). See help fsm for more information on the FSM flow.

The easiest way to get to such a state is to simply run fsm -nomap. Example script:

read_verilog test.v
proc; opt; fsm -nomap
fsm_export -o test.kiss2

For example consider for the following test.v file.

module test(input clk, rst, ctrl, output [3:0] O);
    reg [1:0] state;
    always @(posedge clk) begin
        O <= 0;
        if (rst) begin
            state <= 0;
        end else case (state)
            0: begin
                state <= ctrl ? 1 : 2;
                O <= 1;
            end
            1: begin
                O <= 2;
                if (ctrl) begin
                    state <= 2;
                    O <= 3;
                end
            end
            2: begin
                O <= 4;
                if (ctrl) begin
                    state <= 3;
                    O <= 5;
                end
            end
            3: begin
                if (!ctrl)
                    state <= 2'b00;
            end
        endcase
    end
endmodule

The script above will produce the following test.kiss2 file. (I have just fixed a bug in fsm_detect, so use current git head.)

.i 2
.o 3
.p 12
.s 4
.r s0
-1 s0 s0 100
00 s0 s1 100
10 s0 s2 100
-1 s1 s0 001
00 s1 s1 001
10 s1 s3 001
-1 s2 s0 010
10 s2 s1 010
00 s2 s2 010
00 s3 s0 000
-1 s3 s0 000
10 s3 s3 000

Note: The FSM outputs in this case are not directly the four O signal bits. Instead Yosys created an FSM with a three bit output and an encoder outside of the FSM for creating the four O signal bits.

Regarding visualization: Unfortunately I don't know of any GUI tool to display KISS2 files (which does not mean that no such tool exists). But it is quite easy to create a GraphViz .dot file from a KISS2 file, for example using the following python script (kiss2dot.py).

#!/usr/bin/env python3

import fileinput

print("digraph fsm {")

for line in fileinput.input():
    if not line.startswith("."):
        in_bits, from_state, to_state, out_bits = line.split()
        print("%s -> %s [label=\"IN=%s,\\nOUT=%s\"];" % (from_state, to_state,
                in_bits.replace("-", "?"), out_bits.replace("-", "?")))

print("}")

Example usage:

python3 kiss2dot.py test.kiss2 > test.dot
xdot test.dot

This will display the following graph: